View source

=== '''''Applies to version v2.9''''' ===
{{DISPLAYTITLE:Creating a 1+1 Group}}

A 1+1 group indentifies the two Tmedia hardware devices that operate together to provide 1+1 backup protection. One device is identified as the primary hardware device, while the other device is identified as the backup hardware device. To create a 1+1 group, you must use the Tmedia [[Web Portal]].

'''To create a 1+1 group:'''

1- Click '''1+1''' in the navigation panel

[[Image:Create1and1Group_0_B.png]]


2- Click '''Create New 1+1 Group'''

[[Image:Create1and1Group_1_B.png]]


3- Enter the serial numbers of the primary and 1+1 backup hardware devices.
* Provide a name for the 1+1 group.
* Select the '''serial number''' of the primary hardware device. (This field may already be filled.)
* Select the '''serial number''' of the 1+1 backup hardware device. 
* Set '''Auto switch-back''' to cause an automatic switch back to the original primary hardware device when it becomes available. If the field is clear (not checked), then a switch back to the original device will occur only after a manual reboot of the system.
* Click '''Create'''

[[Image:Create1and1Group_2_B.png]]


4- Verify that the newly added 1+1 group appears in the '''1+1 Groups''' list.

[[Image:Create1and1Group_3_B.png]]



<div class="mw-collapsible mw-collapsed" data-collapsetext="Northbound Interface" data-expandtext="Northbound Interface" style="width: 400px;">

'''Path'''
<pre>
</pre>

'''Parameters (text)'''
<pre>
</pre>


'''Parameters (json)'''
<pre>
</pre>
</div>


==List of Parameters==

* [[Parameter: Name|Name]]
* [[Parameter: Serial|Serial]]
* [[Parameter: Adapter Type|Type]]
* [[Parameter: Auto Switch-Back|Auto Switch-Back]]