Allyntree: Created page with "=== '''''Applies to version(s): v2.7.''''' === {{DISPLAYTITLE:Creating SS7 Point Codes}} Now that you have configured your MTP3 network, you must create point codes for your s..."

2013-07-15T14:17:56Z

Created page with "=== '''''Applies to version(s): v2.7.''''' === {{DISPLAYTITLE:Creating SS7 Point Codes}} Now that you have configured your MTP3 network, you must create point codes for your s..."

New page

=== '''''Applies to version(s): v2.7.''''' ===
{{DISPLAYTITLE:Creating SS7 Point Codes}}
Now that you have configured your MTP3 network, you must create point codes for your system. Point codes are used to define the Tmedia or Tdev system network, the adjacent network and the target network so that calls are properly routed from one network to the next.

To create SS7 originating (OPC) and destination (DPC) point codes:

1- Click '''Point Codes''' in the navigation panel

[[Image:PointCodes_0.png]]

2- Click '''Create New Point Code'''

[[Image:Toolpack_v2.5_Create_Point_Code.png]]

3- Configure the new point code:

* Enter a '''name''' for the point code
* Select a point code '''type''' (select type-specific parameters)
* Select a point code '''length''' (14, 16, 24 bits)
* Enter a '''point code'''
* Click '''Create'''

In this example, an originating point code (OPC) was created.

[[Image:Toolpack_v2.5_Creating_Point_Code.png]]

4. Verify that the '''"Mtp3PointCode was successfully created"''' message appears, and the new point code appears in the '''Point Codes''' list

[[Image:Toolpack_v2.5_Point_Code_Created.png]]

==List of parameters==

* [[Parameter: Name|Name]]
* [[Parameter: Type|Type]]
* [[Parameter: DPC Length|DPC Length]]
* [[Parameter: Point Code|Point Code]]

Toolpack:Creating SS7 Point Codes B - Revision history

Allyntree: Created page with "=== '''''Applies to version(s): v2.7.''''' === {{DISPLAYTITLE:Creating SS7 Point Codes}} Now that you have configured your MTP3 network, you must create point codes for your s..."