William Wong: Created page with "=== '''''Applies to version(s): v2.8''''' === {{DISPLAYTITLE:Creating an M3UA Peer Server (ASP)}} After you create an M3UA peer signaling process, you must create a new M3UA p..."

2019-01-08T09:38:03Z

Created page with "=== '''''Applies to version(s): v2.8''''' === {{DISPLAYTITLE:Creating an M3UA Peer Server (ASP)}} After you create an M3UA peer signaling process, you must create a new M3UA p..."

New page

=== '''''Applies to version(s): v2.8''''' ===
{{DISPLAYTITLE:Creating an M3UA Peer Server (ASP)}}
After you create an M3UA peer signaling process, you must create a new M3UA peer server. A peer server is a logical entity on the IP network that is served by one or more PSPs.

To create an M3UA Peer Server:

1- Click '''M3UA''' in the navigation panel:

[[Image:CreateM3ua_0.png]]

2- Select an M3ua Network:

[[Image:SelectNetwork_SGP_0.png]]

3- Click '''Create New M3ua Peer Server''' in the M3UA network configuration window:

[[Image:Create_M3UA_Peer_Server_SGP_0.png]]

4- Configure the new M3UA Server:

* Enter a '''name''' for the peer server
* Create a local Peer Server (PSRV) with a Routing Context (RC) value representing the remote side； RC value representing the remote side.
* Create a remote Peer Server (PSRV) with a Routing Context (RC) value representing the remote side； RC value representing the remote side.
1) For SG/ASP this value is mandatory to be the same as the ASP local PSRV RC value
2) ASP uses both local and remote peer servers

* Select the '''Traffic Mode Type'''. For remote peer server, this field is used in '''ASPAC'''.
* Click '''Create'''

[[Image:Create_M3UA_Peer_Server_SGP_1.png]]

5- Verify that the '''"M3ua Peer Server was successfully created"''' message appears

[[Image:Create_M3UA_Peer_Server_SGP_2.png]]

6- Associate the newly created peer server with a peer signaling process (PSP):

* Select a '''PSP''' from the list of available PSPs
* Click the '''"<<"''' button to associate the PSP with the peer server

[[Image:Create_M3UA_Peer_Server_SGP_3.png]]

7- Repeat steps 4, 5, 6 above for remote or local peer server if one peer server is not done so

==List of Parameters==

* [[Parameter: Name|Name]]
* [[Parameter: Local|Local]]
* [[Parameter: Routing Context|Routing Context (RC)]]
* [[Parameter: Traffic Mode Type|Traffic Mode Type]]

'''Advanced Parameters'''
* [[Parameter: Load Sharing Mode|Load Sharing Mode]]
* [[Parameter: Required Available|Required Available]]
* [[Parameter: Minimum Active Psps for load sharing|Minimum Active Psps for load sharing]]

Toolpack:Creating an M3UA Peer Server (ASP) B - Revision history

William Wong: Created page with "=== '''''Applies to version(s): v2.8''''' === {{DISPLAYTITLE:Creating an M3UA Peer Server (ASP)}} After you create an M3UA peer signaling process, you must create a new M3UA p..."