William Wong at 08:01, 18 January 2019

2019-01-18T08:01:55Z

William Wong at 08:01, 18 January 2019

2019-01-18T08:01:09Z

William Wong: Created page with "=== '''''Applies to version(s): v2.5, v2.6, v2.7''''' === {{DISPLAYTITLE:Creating an M3UA Route (ASP)}} Now that you have configured M3UA user parts, PSPs, and peer servers, y..."

2019-01-18T07:59:38Z

Created page with "=== '''''Applies to version(s): v2.5, v2.6, v2.7''''' === {{DISPLAYTITLE:Creating an M3UA Route (ASP)}} Now that you have configured M3UA user parts, PSPs, and peer servers, y..."

New page

=== '''''Applies to version(s): v2.5, v2.6, v2.7''''' ===
{{DISPLAYTITLE:Creating an M3UA Route (ASP)}}
Now that you have configured M3UA user parts, PSPs, and peer servers, you must create M3UA routes for your system.

You require 1 route per point codes in your system. This means 1 route per DPC (SSP and STP) and 1 per source point code (OPC).

To create an M3UA route on an ASP:

1- Click '''Create New M3ua Route''' in the M3UA network configuration window

[[Image:Toolpack_v2.5_Create_M3UA_Route.png]]

2- Configure the new M3UA route:

'''For OPC: This route is used for local point code and to reach the ASP.'''
* Enter a '''name''' for the route
* Select a '''route type''':Psrv
* Select an '''M3UA peer server''': Select the previously configured M3US Peer Server with the right RC
* Select an '''M3UA user part''':Select the previously configured M3UA user part
* Select a '''point code''': Select the OPC (ISUP/SCCP Interface OPC)
* Select a '''point code mask''' (Recommended value: Exact match)
* Select a '''sub-service field type''':ISUP or SCCP
* Click '''Create'''

[[Image:Toolpack_v2.5_Creating_M3UA_Route(SGP)_OPC.png]]

'''For DPC: This route is used to reach the DPC used in MTP3 configuration.'''
* Enter a '''name''' for the route
* Select a '''route type''':Psrv
* Select a M3UA peer server: Select the previously configured M3UA remote Peer Server with the right RC
* Select an '''M3UA user part''': NONE
* Select a '''point code''': Select the DPC (Remote ISUP/SCCP Interface)
* Select a '''point code mask''' (Recommended value: Exact match)
* Select a '''sub-service field type''':ISUP or SCCP
* Click '''Create'''

[[Image:Toolpack_v2.5_Creating_M3UA_Route(SGP)_DPC.png]]

3- Verify that the '''"M3ua Route was successfully created"''' message appears

[[Image:Toolpack_v2.5_M3UA_Route_Created.png]]

==List of Parameters==

* [[Parameter: Name|Name]]
* [[Parameter: Route Type|Route Type]]
* [[Parameter: M3UA Peer Server|M3UA Peer Server]] (only if Psrv was chosen as the route type)
* [[Parameter: M3UA Userpart|M3UA Userpart]]
* [[Parameter: Point Code|Point Code]]
* [[Parameter: Point Code Mask|Point Code Mask]]
* [[Parameter: Sub-Service Field Type|Sub-Service Field Type]]

@@ Line 18: / Line 18: @@
 * Enter a '''name''' for the route
 * Select a '''route type''':Psrv
-* Select an '''M3UA peer server''': Select the previously configured M3US Peer Server with the right RC
+* Select an '''M3UA peer server''': Select the previously configured M3UA Peer Server with the right RC
 * Select an '''M3UA user part''':Select the previously configured M3UA user part
 * Select a '''point code''': Select the OPC (ISUP/SCCP Interface OPC)

@@ Line 15: / Line 15: @@
 - Configure the new M3UA route:
-'''For OPC: This route is used for local point code and to reach the ASP.'''
+'''For OPC: This route is used for local point code and to reach the SGP.'''
 * Enter a '''name''' for the route
 * Select a '''route type''':Psrv

Toolpack:Creating an M3UA Route (ASP) A - Revision history

William Wong at 08:01, 18 January 2019

William Wong at 08:01, 18 January 2019

William Wong: Created page with "=== '''''Applies to version(s): v2.5, v2.6, v2.7''''' === {{DISPLAYTITLE:Creating an M3UA Route (ASP)}} Now that you have configured M3UA user parts, PSPs, and peer servers, y..."