Signaling protocols

From TBwiki

(Difference between revisions)

Revision as of 13:56, 8 August 2013

Signaling refers to the system of messages required to set up and tear down telephone calls between the calling and the called parties.

TelcoBridges provides support for the following signaling protocols:

PSTN
- SS7/C7
  - (20+ variants) MTP2, MTP3 and ISUP
- ISDN PRI
  - (14+ variants), National ISDN-2, Euro ISDN, DMS100, DMS250, 4ESS, 5ESS, Japan INS-NET1500
- CAS (Script-oriented approach):
  - CASR1:
    - E&M "Wink start" or "Delay start"
    - Loop start (network side and user side)
  - CASR2:
    - generic(ITU base specification)
    - Brazil
    - Mexico

IP
- SIP RFC 3261 User Agent, SIP Authentication
- SIGTRAN
  - M2UA, M2PA and M3UA

TelcoBridges Tmedia devices also offer the conversion of signaling messages between nodes that use different signaling protocols
All supported protocols can be used simultaneously.

@@ Line 17: / Line 17: @@
 ***[[CASr1_scripting|CASR1]]:
 ****[[CAS_R1_E%26M|E&M "Wink start" or "Delay start"]]
-****[[CAS_R1_LOOPSTART_FXO|Loopstart]] ([[CAS_R1_LOOPSTART_FXO|FXO]] and [[CAS_R1_LOOPSTART_FXS|FXS]] sides)
+****[[CAS_R1_LOOPSTART_NETWORK|Loop start]] ([[CAS_R1_LOOPSTART_NETWORK|network side]] and [[CAS_R1_LOOPSTART_USER|user side]])
 ***[[CAS R2 scripting|CASR2]]:
 ****generic(ITU base specification)