Toolpack:Configuring tbSnmpAgent B

Revision as of 10:51, 12 September 2014

Applies to version(s): v2.8.

Once you have successfully activated the tbSnmpAgent application, follow these steps to configure the SNMP system parameters:

• Click Applications in the navigation panel.

• In the Application Configuration List, select tbsnmpagent.

• Click Application Params

• Enter Values for the following parameters:
  • SNMP IP Port: the IP port to use for making SNMP requests (standard default value is 161)
  • SNMP System Description: the textual description that will appear when polling the sysDescr variable of the SNMPv2-MIB
  • SNMP System Object ID: the value appended to TelcoBridges' value (.1.3.6.1.4.1.21776.3) for the SNMPv2-MIB variable sysObjectId
  • SNMP System Name: the textual description that will appear when polling the sysName variable of the SNMPv2-MIB
  • SNMP System Location: the textual description that will appear when polling the sysLocation variable of the SNMPv2-MIB
  • SNMP System Contact: the textual description that will appear when polling the sysContact variable of the SNMPv2-MIB
    
    

• Click Advanced Params to view or change advanced settings.

• Enter values for the following parameters:

1. • Polling delay to generate traps: this sets the length for the time intervals at which the SNMP agent polls for newly generated traps. The value entered is in seconds
     <br/

• Click Save

• Verify that the is displayed

File:Snmp cfg 7.png