Toolpack:Configuring Virtual Port SBC A
From TBwiki
(Difference between revisions)
(Created page with "=== '''''Applies to version(s): v2.10''''' === {{DISPLAYTITLE:Configuring a Virtual Port}} One or more virtual ports can be created to manage IP traffic. <br> == To config...") |
(→List of Parameters) |
||
| Line 72: | Line 72: | ||
* [[Parameter: VlAN ID|VLAN ID]] | * [[Parameter: VlAN ID|VLAN ID]] | ||
* [[Parameter: Used by SBC|Used by SBC]] | * [[Parameter: Used by SBC|Used by SBC]] | ||
| + | * [[Parameter: Allow PING|Allow PING]] | ||
Latest revision as of 14:02, 21 October 2016
Applies to version(s): v2.10
One or more virtual ports can be created to manage IP traffic.
To configure a virtual port
1. Select IP Interfaces from the navigation panel
2. Click the Virtual Ports tab.
- Click Create New Virtual Port
3. Configure the virtual port.
- Enter a name for the virtual port
- Select the hardware device to which the virtual port is assinged
- Enter a VLAN ID
- Click Create
4. Select a physical port to which the virtual port is assigned.
The selected port is displayed in the current physical ports window.
Path
/configurations/@[configuration_name]/hardware_units/@[hardware_name]/virtual_ports/@[port_name]
Parameters (text)
/configurations/@[configuration_name]/hardware_units/@[hardware_name]/virtual_ports/@[port_name] ethernet_ports = [ "@[port_name]" ] name = "@[port_name]" untagged = true vid = 0
Parameters (json)
{
"ethernet_ports" : [
"@[port_name]"
],
"name" : "@[port_name]",
"untagged" : true,
"vid" : 0
}
