Enabling Local NAT Traversal C
From TBwiki
(Difference between revisions)
(Added northbound interface data) |
m |
||
| Line 1: | Line 1: | ||
| − | === '''''Applies to version: v2.9.''''' === | + | === '''''Applies to version: v2.9, v2.10''''' === |
{{DISPLAYTITLE:Enabling Local NAT Traversal}} | {{DISPLAYTITLE:Enabling Local NAT Traversal}} | ||
Revision as of 08:25, 27 October 2016
Applies to version: v2.9, v2.10
To enable Local NAT Traversal:
1- Select NATs from the navigation panel.
2- Click Create New NAT Traversal
3- Enter a meaningful name.
- Choose a Local Method.
- If necessary, provide an extra parameter.
- Click Create
Once the NAT configuration is completed, it must be associated with a NAP.
3- Select NAPs from the navigation panel
4- Select a SIP NAP from the Network Access Point list
5- In the Network Address Translation section:
- Choose the desired "Local Method". The select box will contain the same name as the Local NAT configuration, that you provided in step #2.
- Click Save
The following describes the 2 Local NAT Traversal Methods:
No NAT
This method is used if you are not behind a NAT. This is the default value.
Force Public IP
This method will set some of the SIP Headers and SDP fields with the IP address that you set.
Path
/configurations/@[configuration_name]/naps/@[nap_name]/sip_cfg/network_address_translation
Parameters (text)
/configurations/@[configuration_name]/naps/@[nap_name]/sip_cfg/network_address_translation local_method = "" remote_method = "None"
Parameters (json)
{
"network_address_translation" : {
"local_method" : "",
"remote_method" : "None"
}
}
}
