TBLinux:How to change the ip address

From TBwiki
(Difference between revisions)
Jump to: navigation, search
(Modified to mgmt0)
(Updated TOC)
 
(2 intermediate revisions by one user not shown)
Line 1: Line 1:
−
This article will explain how to change the IP address of TMG800/TMG3200 of the Linux host.
+
This article will explain how to manually change the management IP address of TMG800/TMG3200/TMG7800 of the Linux host.  
  
−
NOTE: Only the eth0 network interface should be change, eth1 should stays at 172.31.1.2 because it is directly connected to the Tmedia base board.
+
On '''TMG800''' and '''TMG3200''' units you can have up to four internal interfaces:
 +
*pre-2011:
 +
**TMG800 -> Management Interface: eth0, Internal Interface: eth1
 +
**TMG3200-> Management Interface: eth0, Internal Interface: eth1
  
 +
*2011 and after:
 +
**TMG800 -> Management Interface: mgmt0, Internal Interface: vlan3, 1+1 interface#1: vlan710, 1+1 interface#2: vlan711
 +
**TMG3200-> Management Interface: mgmt0, Internal Interface:  int0, 1+1 interface#1: vlan710, 1+1 interface#2: vlan711
  
−
== Switch from DHCP to static  ==
+
'''NOTE 1:''' Only the eth0/mgmt0 network interface should be changed, int0/vlan3/eth1 should stay at 172.31.1.2 since it is directly connected to the Tmedia base board and 1+1 vlans are configured with the Host role (see [[Tmedia_1%2B1|Tmedia 1+1]]).
  
−
====== Note: With units shipped since August 2011, the eth0 configuration name has changed to mgmt0. Use eth0 instead of mgmt0 for older configuration. You can verify if the configuration exists with "ls -a /etc/sysconfig/network-scripts/ifcfg-mgmt0". Use [http://docs.telcobridges.com/mediawiki/index.php/TMG:Change_Management_IP_Address tbchangeip ]for newer configuration instead of the manual procedure described below.<br> ======
+
'''NOTE 2:''' The network 172.31.1.x (netmask 255.255.255.0) cannot be used for the management IP.
  
−
'''Modify the mgmt0 configuration'''  
+
 
 +
On '''TMG7800-CTRL''' servers, you have three internal interfaces:
 +
*pre-2011:
 +
**TMG7800-> Management Interface: eth0, Internal Interface#1: eth1, Internal Interface#2: eth2
 +
 
 +
*2011 and after:
 +
**TMG7800-> Management Interface: mgmt0, Internal Interface#1: eth0, Internal Interface#2: eth1
 +
 
 +
'''NOTE 1:''' Only the eth0/mgmt0 network interface should be changed. eth1/eth0 will use the default address for primary (172.16.0.1) or secondary (172.16.0.2). eth2/eth1 will use the default address for primary (172.18.0.1) or secondary (172.18.0.2). (see [[Tmedia_1%2B1|Tmedia 1+1]]).
 +
 
 +
'''NOTE 2:''' The networks 172.16.x.x and 172.18.x.x (netmask 255.255.0.0) cannot be used for the management Interface IP.
 +
 
 +
<br>
 +
 
 +
== Switch from DHCP to static<br>  ==
 +
 
 +
===Modify the mgmt0 (or eth0) configuration===
  
 
     vi /etc/sysconfig/network-scripts/ifcfg-mgmt0
 
     vi /etc/sysconfig/network-scripts/ifcfg-mgmt0
Line 14: Line 36:
 
''NOTE 1: you need to remove the line DHCP_HOSTNAME''  
 
''NOTE 1: you need to remove the line DHCP_HOSTNAME''  
  
−
''NOTE 2: eth1 interface must remain '''172.31.1.2'''''  
+
''NOTE 2: int0/vlan3/eth1 interface must remain '''172.31.1.2'''''  
  
 
:Example:
 
:Example:
Line 27: Line 49:
 
     ONBOOT=yes
 
     ONBOOT=yes
  
−
'''Add the default gateway address in the network configuration file'''
+
===Add the default gateway address in the network configuration file===
  
 
     vi /etc/sysconfig/network
 
     vi /etc/sysconfig/network
Line 37: Line 59:
 
     GATEWAY=192.168.1.1
 
     GATEWAY=192.168.1.1
  
−
<br> '''Modify the DHCP client configuration.'''
+
===Modify the DHCP client configuration===
  
 
''NOTE:If you don't have a nameserver, remove it from the file, if you do set it to a valid one(DNS).''  
 
''NOTE:If you don't have a nameserver, remove it from the file, if you do set it to a valid one(DNS).''  
Line 48: Line 70:
  
 
<br>  
 
<br>  
−
 
 
:Example of a DNS configuration file containing a DNS server (in theory the dns server should configure itself properly):
 
:Example of a DNS configuration file containing a DNS server (in theory the dns server should configure itself properly):
  
Line 54: Line 75:
 
     nameserver 4.2.2.2
 
     nameserver 4.2.2.2
  
−
:Restart the network interfaces:
+
===Restart the network interfaces===
  
 
     /etc/init.d/network restart
 
     /etc/init.d/network restart
  
−
'''In toolpack.ini, set the variable "TBDB_SERVER_PRI":'''
+
== Switch from static to DHCP  ==
  
−
'''Located'''
+
===Modify the mgmt0 (or eth0) configuration===
  
−
:For release v2.2:
+
    vi /etc/sysconfig/network-scripts/ifcfg-mgmt0
  
−
    vi /lib/tb/toolpack/setup/2.2/toolpack.ini
+
''NOTE 1: you need to remove the IPADDR and NETMASK lines''
  
−
:For release v2.3:
+
''NOTE 2: int0/vlan3/eth1 interface must remain static at '''172.31.1.2'''''  
−
 
+
−
    vi /lib/tb/toolpack/setup/12358/2.3/toolpack.ini
+
−
 
+
−
:For release v2.4:
+
−
 
+
−
    vi /lib/tb/toolpack/setup/12358/2.4/toolpack.ini
+
−
 
+
−
'''To eth1 IP address, for release v2.3.13 and earlier.'''  
+
  
 
:Example:
 
:Example:
  
−
    TBDB_SERVER_PRI = 172.31.1.2
+
     DEVICE=mgmt0
−
 
+
−
'''To localhost, for release v2.3.14 and later.'''
+
−
 
+
−
:Example:
+
−
 
+
−
    TBDB_SERVER_PRI = localhost
+
−
 
+
−
== Switch from static to DHCP ==
+
−
 
+
−
'''Modify the eth0 configuration'''
+
−
    vi /etc/sysconfig/network-scripts/ifcfg-eth0
+
−
 
+
−
''NOTE 1: you need to remove the IPADDR and NETMASK lines''
+
−
 
+
−
''NOTE 2: eth1 interface must remain static at '''172.31.1.2'''''
+
−
 
+
−
:Example:
+
−
     DEVICE=eth0
+
 
     BOOTPROTO=dhcp
 
     BOOTPROTO=dhcp
 
     IPV6ADDR=
 
     IPV6ADDR=
Line 104: Line 99:
 
     DHCP_HOSTNAME=TB005376
 
     DHCP_HOSTNAME=TB005376
  
−
'''Remove the default gateway address in the network configuration file'''
+
===Remove the default gateway address in the network configuration file===
 +
 
 
     vi /etc/sysconfig/network
 
     vi /etc/sysconfig/network
  
 
:Example:
 
:Example:
 +
 
     HOSTNAME=TB005376
 
     HOSTNAME=TB005376
 
     NETWORKING=yes
 
     NETWORKING=yes
  
−
'''Modify the dhcp client configuration.'''
+
===Modify the dhcp client configuration===
  
−
''NOTE:If you don't have a nameserver, remove it from the file, if you do set it to a valid one(DNS).''
+
''NOTE:If you don't have a nameserver, remove it from the file, if you do set it to a valid one(DNS).''  
  
 
     vi /etc/resolv.conf
 
     vi /etc/resolv.conf
  
 
:Example of a DNS configuration file without DNS server:
 
:Example of a DNS configuration file without DNS server:
−
    ; generated by /sbin/dhclient-script
 
  
 +
  &nbsp;; generated by /sbin/dhclient-script
  
 +
<br>
 
:Example of a DNS configuration file containing a DNS server (in theory the dns server should configure itself properly):
 
:Example of a DNS configuration file containing a DNS server (in theory the dns server should configure itself properly):
−
    ; generated by /sbin/dhclient-script
+
 
 +
  &nbsp;; generated by /sbin/dhclient-script
 
     nameserver 192.168.1.5
 
     nameserver 192.168.1.5
−
 
−
'''In toolpack.ini, set the variable "TBDB_SERVER_PRI":'''
 
−
 
−
'''Located'''
 
−
:For release v2.2:
 
−
    vi /lib/tb/toolpack/setup/2.2/toolpack.ini
 
−
:For release v2.3:
 
−
    vi /lib/tb/toolpack/setup/12358/2.3/toolpack.ini
 
−
:For release v2.4:
 
−
    vi /lib/tb/toolpack/setup/12358/2.4/toolpack.ini
 
−
 
−
'''To eth1 IP address, for release v2.3.13 and earlier.'''
 
−
:Example:
 
−
    TBDB_SERVER_PRI = 172.31.1.2
 
−
 
−
'''To localhost, for release v2.3.14 and later.'''
 
−
:Example:
 
−
    TBDB_SERVER_PRI = localhost
 

Latest revision as of 08:59, 27 October 2016

This article will explain how to manually change the management IP address of TMG800/TMG3200/TMG7800 of the Linux host.

On TMG800 and TMG3200 units you can have up to four internal interfaces:

  • pre-2011:
    • TMG800 -> Management Interface: eth0, Internal Interface: eth1
    • TMG3200-> Management Interface: eth0, Internal Interface: eth1
  • 2011 and after:
    • TMG800 -> Management Interface: mgmt0, Internal Interface: vlan3, 1+1 interface#1: vlan710, 1+1 interface#2: vlan711
    • TMG3200-> Management Interface: mgmt0, Internal Interface: int0, 1+1 interface#1: vlan710, 1+1 interface#2: vlan711

NOTE 1: Only the eth0/mgmt0 network interface should be changed, int0/vlan3/eth1 should stay at 172.31.1.2 since it is directly connected to the Tmedia base board and 1+1 vlans are configured with the Host role (see Tmedia 1+1).

NOTE 2: The network 172.31.1.x (netmask 255.255.255.0) cannot be used for the management IP.


On TMG7800-CTRL servers, you have three internal interfaces:

  • pre-2011:
    • TMG7800-> Management Interface: eth0, Internal Interface#1: eth1, Internal Interface#2: eth2
  • 2011 and after:
    • TMG7800-> Management Interface: mgmt0, Internal Interface#1: eth0, Internal Interface#2: eth1

NOTE 1: Only the eth0/mgmt0 network interface should be changed. eth1/eth0 will use the default address for primary (172.16.0.1) or secondary (172.16.0.2). eth2/eth1 will use the default address for primary (172.18.0.1) or secondary (172.18.0.2). (see Tmedia 1+1).

NOTE 2: The networks 172.16.x.x and 172.18.x.x (netmask 255.255.0.0) cannot be used for the management Interface IP.


Contents

Switch from DHCP to static

Modify the mgmt0 (or eth0) configuration

   vi /etc/sysconfig/network-scripts/ifcfg-mgmt0

NOTE 1: you need to remove the line DHCP_HOSTNAME

NOTE 2: int0/vlan3/eth1 interface must remain 172.31.1.2

Example: 
   DEVICE=mgmt0
   BOOTPROTO=static
   IPADDR=192.168.1.10
   NETMASK=255.255.255.0
   IPV6ADDR=
   IPV6PREFIX=
   IPV6_AUTOCONF=yes
   ONBOOT=yes

Add the default gateway address in the network configuration file

   vi /etc/sysconfig/network
Example: 
   HOSTNAME=TB005376
   NETWORKING=yes
   GATEWAY=192.168.1.1

Modify the DHCP client configuration

NOTE:If you don't have a nameserver, remove it from the file, if you do set it to a valid one(DNS). 

   vi /etc/resolv.conf
Example of a DNS configuration file without DNS server: 
   ; generated by /sbin/dhclient-script


Example of a DNS configuration file containing a DNS server (in theory the dns server should configure itself properly): 
   ; generated by /sbin/dhclient-script
   nameserver 4.2.2.2

Restart the network interfaces

   /etc/init.d/network restart

Switch from static to DHCP

Modify the mgmt0 (or eth0) configuration

   vi /etc/sysconfig/network-scripts/ifcfg-mgmt0

NOTE 1: you need to remove the IPADDR and NETMASK lines

NOTE 2: int0/vlan3/eth1 interface must remain static at 172.31.1.2

Example: 
   DEVICE=mgmt0
   BOOTPROTO=dhcp
   IPV6ADDR=
   IPV6PREFIX=
   IPV6_AUTOCONF=yes
   ONBOOT=yes
   DHCP_HOSTNAME=TB005376

Remove the default gateway address in the network configuration file

   vi /etc/sysconfig/network
Example: 
   HOSTNAME=TB005376
   NETWORKING=yes

Modify the dhcp client configuration

NOTE:If you don't have a nameserver, remove it from the file, if you do set it to a valid one(DNS). 

   vi /etc/resolv.conf
Example of a DNS configuration file without DNS server: 
   ; generated by /sbin/dhclient-script


Example of a DNS configuration file containing a DNS server (in theory the dns server should configure itself properly): 
   ; generated by /sbin/dhclient-script
   nameserver 192.168.1.5
Retrieved from "https://docs.telcobridges.com/mediawiki/index.php?title=TBLinux:How_to_change_the_ip_address&oldid=22181"
Personal tools