Toolpack:Configuring IP Interface SBC A
From TBwiki
(Difference between revisions)
(First version) |
(add list of possible services that can be selected simultaneously) |
||
| Line 24: | Line 24: | ||
*Enter a name for the interface | *Enter a name for the interface | ||
| − | *Select | + | *Select 1 or more services to use for the IP interface (RTP, SIP and H.248/RADIUS can be selected simultaneously). |
*Select the '''Host VLAN''' from which IP packets will exit. | *Select the '''Host VLAN''' from which IP packets will exit. | ||
*Indicate whether or not to use DHCP to automatically get an IP address for this port. (selecting this option removes the need to enter and IP address, Netmask, and Gateway) | *Indicate whether or not to use DHCP to automatically get an IP address for this port. (selecting this option removes the need to enter and IP address, Netmask, and Gateway) | ||
Revision as of 15:28, 11 May 2017
Applies to version(s): v3.0
The IP interface of the LAN/WAN ports can be configured by setting the following:
- IP Address
- Netmask
- Gateway
To configure a LAN/WAN IP interface
1. Select IP Interfaces from the navigation panel:
New image needed - under Hosts
2. Click the IP Interfaces tab.
- Click Create New IP Interface
3. Configure the IP interface:
- Enter a name for the interface
- Select 1 or more services to use for the IP interface (RTP, SIP and H.248/RADIUS can be selected simultaneously).
- Select the Host VLAN from which IP packets will exit.
- Indicate whether or not to use DHCP to automatically get an IP address for this port. (selecting this option removes the need to enter and IP address, Netmask, and Gateway)
- Enter an IP address
- Enter a Netmask
- Enter a gateway address
- Click Save
4. The changes are displayed in the IP interfaces information panel:
5. Activate the configuration
Systems -> Edit -> Activate
