TSBC-SW:WebPortal:Initial Configuration

From TBwiki
(Difference between revisions)
Jump to: navigation, search
m (Updated Activation key -> Product Key)
m (Applies to version(s): v3.0)
Line 2: Line 2:
 
{{DISPLAYTITLE:TSBC-SW Initial Configuration}}
 
{{DISPLAYTITLE:TSBC-SW Initial Configuration}}
 
Initial configuration of the TSBC-SW is done through a web browser (Chrome, Firefox or other).  
 
Initial configuration of the TSBC-SW is done through a web browser (Chrome, Firefox or other).  
Before starting, you need these information:
+
Before starting, you need the following information:
 
* '''Product key''': it has the format VTB-XXX-XXXX. If you do not have this key, please contact [mailto:sales@telcobridges.com our sales team]
 
* '''Product key''': it has the format VTB-XXX-XXXX. If you do not have this key, please contact [mailto:sales@telcobridges.com our sales team]
 
* '''Hostname''' of the unit. It is important to set the hostname correctly and not modify it later, otherwise you will need a new license
 
* '''Hostname''' of the unit. It is important to set the hostname correctly and not modify it later, otherwise you will need a new license

Revision as of 12:41, 12 January 2018

Applies to version(s): v3.0

Initial configuration of the TSBC-SW is done through a web browser (Chrome, Firefox or other). Before starting, you need the following information:

  • Product key: it has the format VTB-XXX-XXXX. If you do not have this key, please contact our sales team
  • Hostname of the unit. It is important to set the hostname correctly and not modify it later, otherwise you will need a new license
  • Is the system used as a standalone unit or is it used in a Primary/Secondary configuration?
  • Does the system require external transcoding? As an example, G.711 to G.729a transcoding
  • Role of each of the network interfaces

Then, follow the procedure below.

Initial configuration of the TSBC-SW

1- Open a web browser to the IP of your server, on port 12358. Example if your server address is 192.168.178.30, the URL would be:
http://192.168.178.30:12358
2- You will get the TSBC Configuration Wizard and click on Continue
TSBC WebPortal Configuration wizard.jpg

3- You need to accept the EULA agreement
TSBC SW EULA agreement 1.png

4- Enter your activation key and hostname
TSBC SW Enter activation key 1.png

5- Select the configuration of your SBC - either standalone, or in a Primary/Secondary configuration
TSBC SW standalone 1.png

6- If the system requires external transcoding, select it here. As an example, if the system needs G.711 to G.729a transcoding, then select yes.
TSBC SW transcoding 1.png

7- Here you will choose the role of the network adapters in the system here is a short description of each type:

  • mgmt: Used for management of the system (suggested name: mgmt0)
  • ctrl0: Used for communication with the external transcoding devices (suggested name: ctrl0)
  • ctrl1: Same as ctrl0. Adds redundancy (suggested name: ctrl1)
  • LAN/WAN: SIP/RTP access to private network (suggested name: LAN0) or public network (suggested name: WAN0).

You need to configure all IP interfaces. In case of doubt, configure them as management interfaces.
TSBC SW choose LAN interface role 1.png

8- You can select the "+" sign to get more information on this interface
TSBC SW choose LAN interface role 2.png

9- Once completed, you will be asked get the license seed of this unit to allow for license installation. Please go here for instructions: Toolpack:Retreiving_a_License_TSBC_A
To get help, please contact TelcoBridges TB Support.


Personal tools