TMG5800 Installation Guide

Revision as of 16:45, 23 September 2010 (view source) Allyntree (Talk | contribs) ← Older edit		Revision as of 17:01, 23 September 2010 (view source) Allyntree (Talk | contribs) Newer edit →
Line 16:		Line 16:
	====Prerequisites====		====Prerequisites====
		+
		+	====Vertical Placement of the TMG5800====
		+
		+	====Mounting the TMG5800====
		+
		+	===Connecting to the TMedia Management Interface===
		+
		+	====Prerequisites====
		+
		+	====Interconnections====
		+
		+	===Connecting to the VoIP Network===
		+
		+	====Prerequisites====
		+
		+	====Interconnections====
		+
		+	===Connecting to the PSTN===
		+
		+	====Prerequisites====
		+
		+	====RJ48 Interface (T1/E1/J1)====
		+
		+	====SCSI Interface (T1/E1/J1)====
		+
		+	====Dual BNC Interface (DS3)====
		+
		+	====Optical Interface (OC3/STM-1)====
		+
		+	===Powering Up===
		+
		+	====Prerequisites====
		+
		+	====Connecting to AC Power====
		+
		+	====Connecting to DC Power====
		+
		+	====Verifying the LED Status Indications====
		+
		+	===Powering Down===
		+
		+	==Initial System Configuration==
		+
		+	===Configuring the TMG5800===
		+
		+	===Setting the Time Zone===
		+
		+	===Configuring the Toolpack Using Web Portal===
		+
		+	===Changing the TMG5800 Host IP===
		+
		+	===Changing VoIP Interface Addresses===
		+
		+	===Changing Passwords===
		+
		+	==System Upgrades==
		+
		+	===Installing a New License===
		+
		+	==Troubleshooting Tools==
		+
		+	===Connecting to the Serial Port of the TMG5800===
		+
		+	===Configuring the Terminal Emulator Application===
		+
		+	===Reporting a Problem===
		+
		+	===Setup Information===
		+
		+	===Tbdebug Dump Files===
		+
		+	===Application Logs===
		+
		+	===Backdoor Tools===
		+
		+	====tbx_cli_tools_remote====
		+
		+	====Line/Trunk Status (Tbshowls)====
		+
		+	====VoIP Traffic Capture====
		+
		+	====Wireshark====
		+
		+	====Tbstreamlisten====
		+
		+	====Stream Server Audio Packets to Wave File====
		+
		+	====tbsigtrace signalling traces====
	==Further Reading==		==Further Reading==

---

Revision as of 17:01, 23 September 2010

ABOUT THIS GUIDE

Contents 1 Introduction 1.1 Installation Overview 1.2 Installation Prerequisites 1.3 Preventing Electrostatic Discharge Dammage 2 Equipment Connections 2.1 Package Contents 2.2 Rack Mounting the TMG5800 2.2.1 Prerequisites 2.2.2 Vertical Placement of the TMG5800 2.2.3 Mounting the TMG5800 2.3 Connecting to the TMedia Management Interface 2.3.1 Prerequisites 2.3.2 Interconnections 2.4 Connecting to the VoIP Network 2.4.1 Prerequisites 2.4.2 Interconnections 2.5 Connecting to the PSTN 2.5.1 Prerequisites 2.5.2 RJ48 Interface (T1/E1/J1) 2.5.3 SCSI Interface (T1/E1/J1) 2.5.4 Dual BNC Interface (DS3) 2.5.5 Optical Interface (OC3/STM-1) 2.6 Powering Up 2.6.1 Prerequisites 2.6.2 Connecting to AC Power 2.6.3 Connecting to DC Power 2.6.4 Verifying the LED Status Indications 2.7 Powering Down 3 Initial System Configuration 3.1 Configuring the TMG5800 3.2 Setting the Time Zone 3.3 Configuring the Toolpack Using Web Portal 3.4 Changing the TMG5800 Host IP 3.5 Changing VoIP Interface Addresses 3.6 Changing Passwords 4 System Upgrades 4.1 Installing a New License 5 Troubleshooting Tools 5.1 Connecting to the Serial Port of the TMG5800 5.2 Configuring the Terminal Emulator Application 5.3 Reporting a Problem 5.4 Setup Information 5.5 Tbdebug Dump Files 5.6 Application Logs 5.7 Backdoor Tools 5.7.1 tbx_cli_tools_remote 5.7.2 Line/Trunk Status (Tbshowls) 5.7.3 VoIP Traffic Capture 5.7.4 Wireshark 5.7.5 Tbstreamlisten 5.7.6 Stream Server Audio Packets to Wave File 5.7.7 tbsigtrace signalling traces 6 Further Reading

Introduction

Installation Overview

Installation Prerequisites

Preventing Electrostatic Discharge Dammage

Equipment Connections

Package Contents

Rack Mounting the TMG5800

Prerequisites

Vertical Placement of the TMG5800

Mounting the TMG5800

Connecting to the TMedia Management Interface

Prerequisites

Interconnections

Connecting to the VoIP Network

Prerequisites

Interconnections

Connecting to the PSTN

Prerequisites

RJ48 Interface (T1/E1/J1)

SCSI Interface (T1/E1/J1)

Dual BNC Interface (DS3)

Optical Interface (OC3/STM-1)

Powering Up

Prerequisites

Connecting to AC Power

Connecting to DC Power

Verifying the LED Status Indications

Powering Down

Initial System Configuration

Configuring the TMG5800

Setting the Time Zone

Configuring the Toolpack Using Web Portal

Changing the TMG5800 Host IP

Changing VoIP Interface Addresses

Changing Passwords

System Upgrades

Installing a New License

Troubleshooting Tools

Connecting to the Serial Port of the TMG5800

Configuring the Terminal Emulator Application

Reporting a Problem

Setup Information

Tbdebug Dump Files

Application Logs

Backdoor Tools

tbx_cli_tools_remote

Line/Trunk Status (Tbshowls)

VoIP Traffic Capture

Wireshark

Tbstreamlisten

Stream Server Audio Packets to Wave File

tbsigtrace signalling traces

Further Reading