Configure Fax T38 A

From TBwiki

(Difference between revisions)

Latest revision as of 10:12, 22 July 2013

To enable T.38: 1. Select Profiles from the navigation menu.

2. Set Enable Fax/Modem Relay to enabled.

3. Set Detection Mode to Standard.

4. Set Relay Mode to T.38.

5. Uncheck the Use V.34 option. (For reliability reason, some faxes failed to failback to V17)

@@ Line 1: / Line 1: @@
-To enable T.38, follow these steps:
+=== '''''Applies to version(s): v2.6, v2.7''''' ===
-<pre>
+{{DISPLAYTITLE:Configure Fax T38}}
-. Make sure "Enable Fax/Modem Relay" is enabled.
-. Make sure "Detection Mode" is Standard.
+'''To enable T.38:'''
-. Make sure "Relay Mode" is T.38.
+. Select '''Profiles''' from the navigation menu.
-. Make sure the Use V.34 is unchecked. (For reliability reason, some faxes failed to failback to V17)
-</pre>
+[[Image:Profiles_0.png]]
+. Set '''Enable Fax/Modem Relay''' to enabled.
+. Set '''Detection Mode''' to Standard.
+. Set '''Relay Mode''' to T.38.
+. Uncheck the '''Use V.34''' option. (For reliability reason, some faxes failed to failback to V17)
 [[Image:profile_t38_v27.png]]