Configuring IP Interfaces

From TBwiki
(Difference between revisions)
Jump to: navigation, search
(change contents to become a generic page)
 
Line 1: Line 1:
The IP interface of the VoIP0 and VoIP1 ports can be configured by setting the following:
 
  
*IP Address
+
==Management Port==
*Netmask
+
*Gateway
+
  
<br>
+
[[TMG:Change_Management_IP_Address|Tmedia management port]]
  
== To configure a VoIP0 or VoIP1 port  ==
+
==VoIP Port==
  
1. Select '''IP Interfaces''' from the navigation panel:
+
[[Change_VoIP_Interface_IP_Address|Tmedia VoIP port]]
 
+
[[Image:Toolpack v2.5 Navigation Panel IP Interfaces.png]]
+
 
+
<br> 2. Click '''Edit''' from the IP Interfaces Information panel:
+
 
+
[[Image:Toolpack v2.5 Edit IP Interface.png]]
+
 
+
<br> 3. Configure the IP port:
+
 
+
*Indicate whether or not to use '''DHCP''' on this port
+
*Enter an '''IP address'''
+
*Enter a '''Netmask'''
+
*Enter a '''gateway address'''
+
*Click '''Save'''
+
 
+
'''Note:''' The IP addresses of ETH0, ETH1, VOIP0 and VOIP1 must be on different subnets. <br>
+
 
+
[[Image:Toolpack v2.5 Editing IP Interface.png]]
+
 
+
<br>
+
 
+
4. The changes are displayed in the IP interfaces information panel:
+
 
+
[[Image:Toolpack v2.5 IP Interface Edited.png]]
+
 
+
<br> '''IMPORTANT!''' The system will display the following notice, describing steps to apply your new configuration:
+
 
+
[[Image:Toolpack v2.5 IP Interface Alert.png]]
+
 
+
<br>
+
 
+
5. Activate the configuration
+
 
+
Systems -&gt; Edit -&gt;&nbsp;Activate
+
 
+
 
+
 
+
6. Reboot the adapter (will drop active calls)
+
 
+
Status -&gt;&nbsp;Adapters -&gt; Click on the adapter Serial Number -&gt; Reboot adapter
+
 
+
It will take about 1.5 minutes to restart the unit.
+
 
+
== List of Parameters ==
+
 
+
*[[Parameter: Use DHCP|Use DHCP]]
+
*[[Parameter: IP Address|IP Address]]
+
*[[Parameter: Netmask|Netmask]]
+
*[[Parameter: Gateway|Gateway]]
+

Latest revision as of 09:13, 26 February 2013

Management Port

Tmedia management port

VoIP Port

Tmedia VoIP port

Personal tools