Toolpack:Adding an TMS C

Latest revision as of 12:50, 9 June 2015

Applies to version v2.8

When you receive a new system, at least one hardware configuration will have been set in the Toolpack application server, by default. To add a TMS hardware device to your system, you must use the Tmedia Web Portal.

Schematic showing 2 TMP6400 devices with an external server and a second machine with a web browser

To add one or more additional hardware devices to the Toolpack system configuration, their serial numbers must be registered with the Toolpack application server.

To add a hardware device:

1- Click Hardware Units in the navigation panel

2- Click Create New Unit, to add a new hardware device

3- Enter a name for the hardware device

• Enter the serial number of the new hardware device (filling in the Serial Number field will cause auto-completion of the field to occur).
• Select the appropriate hardware device from the Type field. (In this case select TMS)
• Enter the location in which the hardware device is installed.
• Enter a meaningful description for the use or purpose of the hardware device.
• Select Enabled from the Target State field.
• Click Create

4- Verify that the newly added hardware device appears in the TMS Units list.

List of Parameters

• Name
• Serial
• Type
• Location
• Description
• Target State

Advanced Parameters

• Enable management port redundancy
• Enable HTTP access
• Enable Telnet access