Toolpack:Enabling RADIUS A

From TBwiki

(Difference between revisions)

Revision as of 12:20, 30 October 2012

This page describes how to enable and configure a TMG system to capture CDRs, using a RADIUS server.

Enabling RADIIS

1- Select Gateway -> Configurations from the navigation panel.

2- Verify that the box Use CDR behavior is checked.

3- Configure the CDR behavior in the CDR Options section:

Enable periodic CDR update will add one entry in the CDR per Periodic CDR update time, in minutes.
Select the CDR Mode:
- Text CDR only: Will store the CDRs in a flat file. See Text CDR
- Radius CDR only: Will send the CDR to an external Radius Server. See Radius CDR
- Text and Radius CDR: Will store the CDRs in a flat file and send the CDR to an external Radius Server.
- Radius CDR with Text CDR Fallback: Will send the CDR to an external Radius Server and if the Radius server cannot handle the load of CDRs, they will be stored in a flat file.
Click Save to save your changes.

4- Verify that the Gateway configuration was successfully updated. message appears.

Configuring RADIUS

@@ Line 1: / Line 1: @@
 === '''''Applies to version(s): v2.6''''' ===
 {{DISPLAYTITLE:Toolpack: Configuring RADIUS}}
-This page describes how to configure a TMG system to capture CDRs, either with a flat file or with a RADIUS server.
+This page describes how to enable and configure a TMG system to capture CDRs, using a RADIUS server.
+''Enabling RADIIS''
 - Select '''Gateway -> Configurations''' from the navigation panel.
@@ Line 28: / Line 30: @@
 [[Image:RADIUS_v2_5_gw_cfg_success.png|border]]
+''Configuring RADIUS''
-- Additional configuration:
-*If in any of the choices, Radius CDR is selected, go here to configure Radius: [[Configure_Radius_Client|Configure Radius Client]]
-*If in any of the choices, Text CDR is selected, go here to configure it: [[Text Call Detail Records (CDR)|Text CDR]]