Toolpack:Modify NAP profile C

Revision as of 09:59, 4 November 2014

Applies to version v2.8

Profiles are created to define the manner in which many aspects of signalling are handled by the system. Profiles can be used to fine-tune the handling of VoIP, TDM, IVR and Tones, and more. To create a profile you must use the Tmedia Web Portal.

To create a profile:

1- Click Profiles in the navigation panel

System profiles contain settings for a large number of call processing options. To learn more about these profile settings, consult the following profile categories:

• VoIP Profile Settings
  • SDP
  • SIP
  • RTP and Audio
  • Fax Relay

• TDM Profile Settings
  • TDM SS7
  • TDM SS7 or ISDN

• IVR and Tones Profile Settings
  • IVR Record
  • Early Media Relay and Ring Tone Generation
  • Busy Tone Generation
  • Tone Options
  • TDM Lines

• LNP Options Profile Settings

• Call Transfer Profile Settings

Tone definition profiles list the frequencies for each tone that is used in a telephone network. This tone definition can change from country to country, such as the ring tone and busy tone. To learn more about how to configure customized tone definitions, see:

• Tone Definition Profiles

2- Click Create New Profile, to create a new profile

3- Enter a name for the profile

• Click Create

4- Verify that the "Profile was successfully created" message appears, and that the newly added profile appears in the Profiles List below