Replace TMG3200 Standalone With Spare

Revision as of 15:55, 9 March 2015

Warning: This procedure will require some system downtime.

Overview

The replacement of a standalone TMG3200 is comprised of three parts:

• Removing the defective unit
• Installing the replacement unit
• Startup

Removing the Defective Unit

• Shutdown the TMG3200
• Disconnect from the PSTN network
• Disconnect from the VoIP network
• Disconnect from the Management network
• Remove the TMG3200 from the equipment rack

Installing the Replacement Unit

Refer to TMG3200 Installation guide

• Rack-mount the Replacement Unit
• Connect to the Management Interface
• Connect to the VoIP Network
• Connect to the PSTN Network

Starting Up the TMG3200

Refer to TMG3200 Installation guide

• Power up the TMG3200.
• Connect to the web portal
  • Set host role v2.8
  • Set host role v2.7

Restoring a Backup Copy of a Database

a. If a database backup is available
Import database using the Web Portal Backup menu
Apply the configuration on the system

b. If a database backup is not available
Configure the system using the web portal
Apply the configuration on the system

The backup of your system configuration settings will need to be restored after the replacement of the defective unit.

To learn about how to do system backups, refer to: https://docs.telcobridges.com/tbwiki/Toolpack:Database_Backup_B

To learn about how to restore system backups, refer to: https://docs.telcobridges.com/tbwiki/Toolpack:Restoring_a_Database_Backup_B