Configure Fax VBD B

From TBwiki

(Difference between revisions)

Jump to: navigation, search

Revision as of 12:12, 26 January 2016

Applies to version(s): v2.9

To enable VBD:

1. Select Profiles from the navigation menu.

2. Click Create New Profile

3. Enter a name for the Fax Profile.

Click Fax/Modem Relay to expand the view.

4. Configure the settings:

Set Enable Fax/Modem Relay to enabled.
Set Detection Mode to Standard.
Set Relay Mode to Passthrough.
Set Switch to FAX relay upon CNG tone to checked.
Select a codec. For example silence suppression

You can set one or both of the following two parameters:

Support V.152 VBD
Force V.152 VBD

Support V.152 VBD	Force V.152 VBD	Description
Enabled	Disabled	Will negociate the gpmd parameter in the SDP.
Disabled	Enabled	Will always use VBD.
Enabled	Enabled	Will accept VBD without negociation and will negociate for it on an outgoing fax.

5. Verify thet the Profile was successfully created message is displayed.

Path

/configurations/@[configuration_name]/profiles/@[profile_name]

Parameters (text)

/configurations/@[configuration_name]/profiles/@[profile_name]
name                            = "FaxPassThrough"

/configurations/@[configuration_name]/profiles/@[profile_name]/call_transfer_options
call_transfer_mode               = "Relay"
call_transfer_timeout            = "1 minute"
terminate_transferor_immediately = false

/configurations/@[configuration_name]/profiles/@[profile_name]/ivr_record
vad_enabled           = false
vad_noise_floor_level = "-30"

/configurations/@[configuration_name]/profiles/@[profile_name]/lnp_options
incoming_lnp_mode = "Terminate LNP"
outgoing_lnp_mode = "No LNP insertion"

/configurations/@[configuration_name]/profiles/@[profile_name]/mlpp_options
look_ahead_for_busy = "LFB allowed"
network_identity    = 0
outgoing_mode       = "No MLPP insertion"
precedence_level    = "PL flash override"
service_domain      = 0

/configurations/@[configuration_name]/profiles/@[profile_name]/tdm_line
subject_to_electric_hybrid_echo = true

/configurations/@[configuration_name]/profiles/@[profile_name]/tones_and_call_progress_options
busy_tone_max_duration                     = "30 seconds"
default_digit_duration                     = 100
default_interval_between_digits            = 60
generate_busy_tone                         = false
tone_definition_profile                    = "USA-Canada"

/configurations/@[configuration_name]/profiles/@[profile_name]/tones_and_call_progress_options/early_media_relay_and_ring_tone_generation
connect_full_duplex_during_early_media = false
delay_before_connecting_early_media    = "0 millisecond"
incoming_calls_early_media_mode        = "Forward from outgoing to incoming call"
outgoing_calls_early_media_mode        = "Automatic early media detection"
ring_tone_starting_state               = "Call Alerted"

Parameters (json)

{
  "call_transfer_options" : {
    "call_transfer_mode" : "Relay",
    "call_transfer_timeout" : "1 minute",
    "terminate_transferor_immediately" : false
  },
  "ivr_record" : {
    "vad_enabled" : false,
    "vad_noise_floor_level" : "-30"
  },
  "lnp_options" : {
    "incoming_lnp_mode" : "Terminate LNP",
    "outgoing_lnp_mode" : "No LNP insertion"
  },
  "mlpp_options" : {
    "look_ahead_for_busy" : "LFB allowed",
    "network_identity" : 0,
    "outgoing_mode" : "No MLPP insertion",
    "precedence_level" : "PL flash override",
    "service_domain" : 0
  },
  "name" : "@[profile_name]",
  "tdm_line" : {
    "subject_to_electric_hybrid_echo" : true
  },
  "tones_and_call_progress_options" : {
    "busy_tone_max_duration" : "30 seconds",
    "default_digit_duration" : 100,
    "default_interval_between_digits" : 60,
    "early_media_relay_and_ring_tone_generation" : {
      "connect_full_duplex_during_early_media" : false,
      "delay_before_connecting_early_media" : "0 millisecond",
      "incoming_calls_early_media_mode" : "Forward from outgoing to incoming call",
      "outgoing_calls_early_media_mode" : "Automatic early media detection",
      "ring_tone_starting_state" : "Call Alerted"
    },
    "generate_busy_tone" : false,
    "tone_definition_profile" : "USA-Canada"
  },
  "custom_cause_maps" : {
  },
  "tdm" : {
    "ss7" : {
      "default_backward_call_indicator" : "0x5404",
      "default_backward_call_indicator_enforce_mask" : "0x0000",
      "default_forward_call_indicator" : "0x2001",
      "default_forward_call_indicator_enforce_mask" : "0x0000",
      "dont_forward_early_acm" : false,
      "force_backward_call_indicator_in_anm" : false,
      "forward_application_transport_ie" : false,
      "forward_call_cpg_hold_retrieval" : true,
      "forward_call_indicator_international" : false,
      "forward_call_suspend_resume" : true,
      "hop_counter_ie_handling" : "Decrement and forward",
      "send_charge_number_ie_in_iam" : false
    },
    "ss7_or_isdn" : {
      "always_send_alerting" : false,
      "cnam_collection_timeout" : "1 second",
      "cnam_using_alternate_methods" : false,
      "colr" : false,
      "information_transfer_capability" : "Relay",
      "network_specific_facilities_ie" : "",
      "send_connected_number_ie" : false,
      "send_display_ie" : false,
      "support_2_calling_number_ie" : false
    }
  },
  "voip" : {
    "fax_modem_relay" : {
      "detection_mode" : "Standard",
      "enable_early_fax_modem_tone_detection" : false,
      "enable_fax_modem_relay" : true,
      "expected_cng_tones" : 2,
      "fax_modem_passthrough_parameters" : {
        "codec" : "PCMU",
        "detection_type" : "Silence suppression off",
        "force_v152_vbd" : false,
        "jitter_buffer_depth" : 40,
        "packet_duration" : "20ms",
        "support_v152_vbd" : false,
        "use_nse" : false
      },
      "fax_modem_tones_detection_duration" : "30 seconds",
      "modem_vs_fax_distinction_timeout" : "0 millisecond",
      "relay_mode" : "Passthrough",
      "switch_to_fax_relay_upon_cng_tone" : true,
      "switch_to_passthrough_upon_bell_ans" : true,
      "t38_parameters" : {
        "fill_bit_removal" : false,
        "max_bitrate" : "14400",
        "redundancy_count" : 0,
        "transmission_level_minus_dbm" : 10,
        "use_v34" : false
      }
    },
    "rtp_and_audio" : {
      "clear_channel_packet_duration" : "20ms",
      "codec_g726_aal2_format" : false,
      "drop_call_thresholds_no_rx_packets" : "0 second",
      "echo_cancellation" : {
        "echo_cancellation_enabled" : true,
        "enable_coefficient_update" : true,
        "enable_dc_removal_filter" : true,
        "gain_power_level" : "0",
        "non_linear_processor_tune_option" : "Normal"
      },
      "jitter_buffer" : {
        "initial_depth" : 20,
        "max_depth" : 200,
        "min_depth" : 20,
        "smooth_deletion" : true
      },
      "packet_network" : {
        "packet_loss_concealment" : true,
        "type_of_service" : 0
      },
      "rtcp" : {
        "rtcp_enabled" : false,
        "sdes_cname" : "",
        "transmission_interval" : "5 seconds",
        "use_xrtcp" : false
      },
      "tdm_volume_control" : {
        "rx_gain_level" : 0,
        "tx_gain_level" : 0
      },
      "vad_noise_floor_level" : "-45"
    },
    "sdp" : {
      "force_fax_tones_as_telephony_event" : false,
      "profile_sdp_description" : "m=audio 0 RTP/AVP 0 8 4 18 101 13\r\na=rtpmap:101 telephone-event/8000\r\na=fmtp:101 0-15,32-36"
    },
    "sip" : {
      "detect_180_with_sdp_as_early_media" : true,
      "dont_forward_183_progress" : false,
      "dtmf_relay_scheme" : [
        "Relay DTMF according to RFC2833",
        "Relay DTMF using SIP INFO messages",
        "Relay DTMF in band"
      ],
      "enable_sip_custom_headers" : false,
      "forward_sip_hold_type" : "SS7 Remote Hold/Retrieval",
      "forward_ss7_cpg_hold_retrieval" : true,
      "forward_ss7_suspend_resume" : true,
      "max_forwards_handling" : "Decrement and forward",
      "sdp_combining_options" : [
        "Use sender's codec order"
      ],
      "sdp_generation_options" : [
      ],
      "send_180_with_sdp" : false,
      "use_isup_oli_format" : false,
      "use_non_ambiguous_from_tag" : false,
      "use_reason_header" : true,
      "use_strict_routing" : false,
      "user_to_user_encoding" : "Escaped text"
    }
  }
}

Configure Fax VBD B

Revision as of 12:12, 26 January 2016

Applies to version(s): v2.9

Views

Personal tools

Navigation

Search

Toolbox