MTP2:Connection mode
From TBwiki
(Difference between revisions)
(initial content) |
(fixed errors) |
||
| Line 1: | Line 1: | ||
| − | The 'Connection mode' parameter specifies the different modes of connection for a MTP2 link. | + | The 'Connection mode' parameter specifies the different modes of connection for a [[MTP2 Layer|MTP2]] link. |
| Line 8: | Line 8: | ||
! width="350" style="background:#efefef;" |Description | ! width="350" style="background:#efefef;" |Description | ||
|- | |- | ||
| − | | Normal|| | + | | Normal|| MTP2 layer is used in conjunction with an above MTP3 layer |
|- | |- | ||
| − | | HSL|| | + | | HSL|| MTP2 layer high speed link (HSL) is used in conjunction with an above MTP3 layer |
| − | + | ||
|} | |} | ||
'''NOTE:''' The HSL mode uses timeslots 1 to 31 for E1 and 1 to 24 for T1/J1 interfaces. In Normal mode, you pick and choose the timeslots that are required. | '''NOTE:''' The HSL mode uses timeslots 1 to 31 for E1 and 1 to 24 for T1/J1 interfaces. In Normal mode, you pick and choose the timeslots that are required. | ||
Revision as of 13:28, 27 August 2009
The 'Connection mode' parameter specifies the different modes of connection for a MTP2 link.
The following values are allowed:
| Connection mode | Description |
|---|---|
| Normal | MTP2 layer is used in conjunction with an above MTP3 layer |
| HSL | MTP2 layer high speed link (HSL) is used in conjunction with an above MTP3 layer |
NOTE: The HSL mode uses timeslots 1 to 31 for E1 and 1 to 24 for T1/J1 interfaces. In Normal mode, you pick and choose the timeslots that are required.
