TBLinux:How to change the ip address
(creation) |
(minor fix) |
||
| Line 30: | Line 30: | ||
'''Modify the dhcp client configuration.''' | '''Modify the dhcp client configuration.''' | ||
| + | |||
''NOTE:If you don't have a nameserver, remove it from the file, if you do set it to a valid one(DNS).'' | ''NOTE:If you don't have a nameserver, remove it from the file, if you do set it to a valid one(DNS).'' | ||
| Line 67: | Line 68: | ||
'''Modify the dhcp client configuration.''' | '''Modify the dhcp client configuration.''' | ||
| + | |||
''NOTE:If you don't have a nameserver, remove it from the file, if you do set it to a valid one(DNS).'' | ''NOTE:If you don't have a nameserver, remove it from the file, if you do set it to a valid one(DNS).'' | ||
Revision as of 15:24, 21 August 2009
This article will explain how to change the ip address of TMG800/TMG3200 of the Linux host.
NOTE: Only the eth0 network interface should be change, eth1 should stays at 172.31.1.2 because it is directly connected to the Tmedia base board.
Switch from dhcp to static
Modify the eth0 configuration
vi /etc/sysconfig/network-scripts/ifcfg-eth0
NOTE: you need to remove the line DHCP_HOSTNAME
- Example:
DEVICE=eth0 BOOTPROTO=static IPADDR=192.168.1.10 NETMASK=255.255.255.0 IPV6ADDR= IPV6PREFIX= IPV6_AUTOCONF=yes ONBOOT=yes
Add the default gateway address in the network configuration file
vi /etc/sysconfig/network
- Example:
HOSTNAME=TB005376 NETWORKING=yes GATEWAY=192.168.1.1
Modify the dhcp client configuration.
NOTE:If you don't have a nameserver, remove it from the file, if you do set it to a valid one(DNS).
vi /etc/resolv.conf
- Example of a dns configuration file without DNS server:
; generated by /sbin/dhclient-script
- Example of a dns configuration file containing a DNS server (in theory the dns server should configure itself properly):
; generated by /sbin/dhclient-script nameserver 192.168.1.5
Switch from static to dhcp
Modify the eth0 configuration
vi /etc/sysconfig/network-scripts/ifcfg-eth0
NOTE: you need to remove the IPADDR and NETMASK lines
- Example:
DEVICE=eth0 BOOTPROTO=dhcp IPV6ADDR= IPV6PREFIX= IPV6_AUTOCONF=yes ONBOOT=yes DHCP_HOSTNAME=TB005376
Remove the default gateway address in the network configuration file
vi /etc/sysconfig/network
- Example:
HOSTNAME=TB005376 NETWORKING=yes
Modify the dhcp client configuration.
NOTE:If you don't have a nameserver, remove it from the file, if you do set it to a valid one(DNS).
vi /etc/resolv.conf
- Example of a dns configuration file without DNS server:
; generated by /sbin/dhclient-script
- Example of a dns configuration file containing a DNS server (in theory the dns server should configure itself properly):
; generated by /sbin/dhclient-script nameserver 192.168.1.5
