Use Cases:HW Transcoding Configuration UseCase1 A

From TBwiki
(Difference between revisions)
Jump to: navigation, search
(Changed 'IP port range' by 'RTP port ranges')
(Fixed typo (RTP instead of RPT))
Line 153: Line 153:
 
*[[Toolpack:Tsbc_Protocol_Stack_Settings_3.0|Configure SIP]]
 
*[[Toolpack:Tsbc_Protocol_Stack_Settings_3.0|Configure SIP]]
 
** For WAN0
 
** For WAN0
−
***RPT port ranges parameters:
+
***RTP port ranges parameters:
 
****'''Name''': pr_wan0
 
****'''Name''': pr_wan0
 
****'''IP Interface''': vlan_1650:wan0
 
****'''IP Interface''': vlan_1650:wan0

Revision as of 13:21, 3 October 2017

Applies to version(s): v3.0

Contents


Two subnet, Two IP Addresses, tagged

UseCase TsbcHwTranscoding 0.png

Perequisites
  • Host 
Network device name    Network device role
-------------------    -------------------
mgmt0                  mgmt
wan0                   LAN/WAN
lan0                   LAN/WAN
trans0                 LAN/WAN
trans1                 LAN/WAN
ctrl0                  ctrl0
ctrl1                  ctrl1
  • Hardware unit 
TSBC-HW-TRANS

Tsbc network configuration

Configure IP Network for wan0 Configure IP Network for lan0 Configure IP Network for trans0 Configure IP Network for trans1
  • Create wan0 IP Address:
    • Name: wan0
    • Service to use: RTP, SIP
    • Host VLAN: vp_wan0:vlan_1650
    • IP address: 192.168.150.1
    • Netmask: 255.255.255.0


  • Create lan0 IP Address:
    • Name: lan0
    • Service to use: RTP, SIP
    • Host VLAN: vp_lan0:vlan_1651
    • IP address: 192.168.151.1
    • Netmask: 255.255.255.0


  • Create trans0 IP Address:
    • Name: trans0
    • Service to use: RTP, SIP
    • Host VLAN: vp_trans0:vlan_752
    • IP address: 192.168.152.1
    • Netmask: 255.255.255.0


  • Create trans1 IP Address:
    • Name: trans1
    • Service to use: RTP, SIP
    • Host VLAN: vp_trans1:vlan_753
    • IP address: 192.168.153.1
    • Netmask: 255.255.255.0

Transcoding unit configuration

Add transcoding unit


Transcoding unit network configuration

Configure IP Network for voip0 Configure IP Network for voip1
  • Modify voip0 IP Address:
    • Interface Name: voip0
    • Service to use: RTP, SIP
    • Virtual port: TB002177:voip0
    • IP address: 192.168.152.10
    • Netmask: 255.255.255.0


  • Modify voip1 IP Address:
    • Interface Name: voip1
    • Service to use: RTP, SIP
    • Virtual port: TB002177:voip1
    • IP address: 192.168.153.10
    • Netmask: 255.255.255.0

Tsbc sip configuration

Configure SIP
  • Configure SIP
    • For WAN0
      • RTP port ranges parameters:
        • Name: pr_wan0
        • IP Interface: vlan_1650:wan0
        • RTP Port min: 20000
        • RTP Port max: 40000
      • SIP transport server parameters:
        • Name: ts_wan0
        • Port: 5060
        • IP Interface: vlan_1650:wan0
      • SIP NAP parameters:
        • Name: nap_sip_wan0
        • Proxy Address: 192.168.150.10
        • Port Range: vlan_1650:wan0:pr_wan0:20000-40000
        • SIP Transport Servers: ts_wan0
    • For LAN0
      • RTP port ranges parameters:
        • Name: pr_lan0
        • IP Interface: vlan_1651:lan0
        • RTP Port min: 20000
        • RTP Port max: 40000
      • SIP transport server parameters:
        • Name: ts_lan0
        • Port: 5060
        • IP Interface: vlan_1651:lan0
      • SIP NAP parameters:
        • Name: nap_sip_lan0
        • Proxy Address: 192.168.151.10
        • Port Range: vlan_1651:lan0:pr_lan0:20000-40000
        • SIP Transport Servers: ts_lan0
Retrieved from "https://docs.telcobridges.com/mediawiki/index.php?title=Use_Cases:HW_Transcoding_Configuration_UseCase1_A&oldid=23785"
Personal tools