Toolpack:Configuring IP Interface SBC A

From TBwiki

(Difference between revisions)

Revision as of 14:56, 23 October 2017

The IP interface of the LAN/WAN ports can be configured by setting the following:

1. Select IP Interfaces from the navigation panel:

2. Click the IP Interfaces tab.

3. Configure the IP interface:

Enter a name for the interface
Select 1 or more services to use for the IP interface (RTP, SIP and H.248/RADIUS can be selected simultaneously).
Select the Host VLAN from which IP packets will exit.
Indicate whether or not to use DHCP to automatically get an IP address for this port. (selecting this option removes the need to enter and IP address, Netmask, and Gateway)
Enter an IP address
Enter a Netmask
Enter a gateway address
Click Save

OR

4. The changes are displayed in the IP interfaces information panel:

5. Activate the configuration

@@ Line 14: / Line 14: @@
 . Select '''IP Interfaces''' from the navigation panel:
-[[Image:Create IP Interface_Tsbc_0]]
+[[Image:Create_IP_Interface_Tsbc_0]]
 <br> 2. Click the '''IP Interfaces''' tab.
 *Click '''Create New IP Interface'''
-[[Image:Create IP Interface_Tsbc_1]]
+[[Image:Create_IP_Interface_Tsbc_1]]
 <br> 3. Configure the IP interface:
@@ Line 32: / Line 32: @@
 *Click '''Save'''
-[[Image:Create IP Interface_Tsbc_2a]]
+[[Image:Create_IP_Interface_Tsbc_2a]]
 OR
-[[Image:Create IP Interface_Tsbc_2a]]
+[[Image:Create_IP_Interface_Tsbc_2a]]
 <br>
@@ Line 42: / Line 42: @@
 . The changes are displayed in the IP interfaces information panel:
-[[Image:Create IP Interface_Tsbc_3]]
+[[Image:Create_IP_Interface_Tsbc_3]]