Toolpack:Configuring IP Interface SBC A
From TBwiki
(Difference between revisions)
(→To configure a LAN/WAN IP interface) |
m |
||
| Line 1: | Line 1: | ||
| − | === '''''Applies to version(s): v3.0''''' === | + | === '''''Applies to version(s): v3.0, v3.1''''' === |
{{DISPLAYTITLE:Configuring IP Interfaces}} | {{DISPLAYTITLE:Configuring IP Interfaces}} | ||
Revision as of 12:30, 24 April 2019
Applies to version(s): v3.0, v3.1
The IP interface of the LAN/WAN ports can be configured by setting the following:
- IP Address
- Netmask
- Gateway
To configure a LAN/WAN IP interface
1. Select IP Interfaces from the navigation panel:
2. Click the IP Interfaces tab.
- Click Create New IP Interface
3. Configure the IP interface:
- Enter a name for the interface
- Select 1 or more services to use for the IP interface (RTP, SIP and H.248/RADIUS can be selected simultaneously).
- Select the Host VLAN from which IP packets will exit.
- Indicate whether or not to use DHCP to automatically get an IP address for this port. (selecting this option removes the need to enter and IP address, Netmask, and Gateway)
- Enter an IP address
- Enter a Netmask
- Enter a gateway address
- Click Save
OR
4. The changes are displayed in the IP interfaces information panel:
5. Activate the configuration
- Select System from the navigation panel.
- Click Activate
