Use Cases:HW Transcoding Configuration UseCase1 A

From TBwiki
(Difference between revisions)
Jump to: navigation, search
(NT: Added Perequisites of the Hardware Unit)
Line 13: Line 13:
 
|
 
|
 
*FREESBC Host
 
*FREESBC Host
−
  Network device name    Network device role
+
  Network device name    Network device role   Network Config
−
  -------------------    -------------------
+
  -------------------    -------------------    -------------------
−
  mgmt0                  mgmt
+
  mgmt0                  mgmt                   Untagged
−
  wan0                  LAN/WAN
+
  wan0                  LAN/WAN               Tagged 1650
−
  lan0                  LAN/WAN
+
  lan0                  LAN/WAN               Tagged 1651
−
  trans0                LAN/WAN
+
  trans0                LAN/WAN               Tagged 752
−
  trans1                LAN/WAN
+
  trans1                LAN/WAN               Tagged 753
−
  ctrl0                  ctrl0
+
  ctrl0                  ctrl0                 Tagged 750
−
  ctrl1                  ctrl1
+
  ctrl1                  ctrl1                 Tagged 751                 
 
*Hardware Unit - TB002177 is the TSBC-HW-TRANS unit in the below setup
 
*Hardware Unit - TB002177 is the TSBC-HW-TRANS unit in the below setup
−
   Network device name    Network device role
+
   Network device name    Network device role   Network Config
−
  -------------------    -------------------
+
  -------------------    -------------------    -------------------
−
  voip0                  LAN/WAN
+
  voip0                  LAN/WAN               Tagged 752
−
  voip1                  LAN/WAN
+
  voip1                  LAN/WAN               Tagged 753
−
  eth0                    ctrl0
+
  eth0                    ctrl0                 Untagged PVID 750  **
−
  eth1                    ctrl1
+
  eth1                    ctrl1                 Untagged PVID 751  **
  
 
|-
 
|-
 
|}
 
|}
 +
"**" The control ports on the Hardware unit need to be configure with Link Type: Access
  
 
== Two subnet, Two IP Addresses, tagged ==
 
== Two subnet, Two IP Addresses, tagged ==

Revision as of 13:50, 11 June 2018

Applies to version(s): v3.0

Contents


Perequisites

Perequisites
  • FREESBC Host 
Network device name    Network device role    Network Config
-------------------    -------------------    -------------------
mgmt0                  mgmt                   Untagged
wan0                   LAN/WAN                Tagged 1650
lan0                   LAN/WAN                Tagged 1651
trans0                 LAN/WAN                Tagged 752
trans1                 LAN/WAN                Tagged 753
ctrl0                  ctrl0                  Tagged 750
ctrl1                  ctrl1                  Tagged 751
  • Hardware Unit - TB002177 is the TSBC-HW-TRANS unit in the below setup 
 Network device name    Network device role    Network Config
-------------------    -------------------    -------------------
voip0                   LAN/WAN                Tagged 752
voip1                   LAN/WAN                Tagged 753
eth0                    ctrl0                  Untagged PVID 750  **
eth1                    ctrl1                  Untagged PVID 751  **

"**" The control ports on the Hardware unit need to be configure with Link Type: Access

Two subnet, Two IP Addresses, tagged

UseCase TsbcHwTranscoding 0.png


Tsbc network configuration

Configure IP Network for wan0 Configure IP Network for lan0 Configure IP Network for trans0 Configure IP Network for trans1
  • Create wan0 IP Address:
    • Name: wan0
    • Service to use: RTP, SIP
    • Host VLAN: vp_wan0:vlan_1650
    • IP address: 192.168.150.1
    • Netmask: 255.255.255.0


  • Create lan0 IP Address:
    • Name: lan0
    • Service to use: RTP, SIP
    • Host VLAN: vp_lan0:vlan_1651
    • IP address: 192.168.151.1
    • Netmask: 255.255.255.0


  • Create trans0 IP Address:
    • Name: trans0
    • Service to use: RTP
    • Host VLAN: vp_trans0:vlan_752
    • IP address: 192.168.152.1
    • Netmask: 255.255.255.0


  • Create trans1 IP Address:
    • Name: trans1
    • Service to use: RTP
    • Host VLAN: vp_trans1:vlan_753
    • IP address: 192.168.153.1
    • Netmask: 255.255.255.0

Transcoding unit configuration

Add transcoding unit


Transcoding unit network configuration

Configure IP Network for voip0 Configure IP Network for voip1
  • Modify voip0 IP Address:
    • Interface Name: voip0
    • Service to use: RTP
    • Virtual port: TB002177:voip0
    • IP address: 192.168.152.10
    • Netmask: 255.255.255.0


  • Modify voip1 IP Address:
    • Interface Name: voip1
    • Service to use: RTP
    • Virtual port: TB002177:voip1
    • IP address: 192.168.153.10
    • Netmask: 255.255.255.0

Tsbc sip configuration

Configure SIP
  • Configure SIP
    • For WAN0
      • RTP port ranges parameters:
        • Name: pr_wan0
        • IP Interface: vlan_1650:wan0
        • RTP Port min: 20000
        • RTP Port max: 40000
      • SIP transport server parameters:
        • Name: ts_wan0
        • Port: 5060
        • IP Interface: vlan_1650:wan0
      • SIP NAP parameters:
        • Name: nap_sip_wan0
        • Proxy Address: 192.168.150.10
        • Port Range: vlan_1650:wan0:pr_wan0:20000-40000
        • SIP Transport Servers: ts_wan0
    • For LAN0
      • RTP port ranges parameters:
        • Name: pr_lan0
        • IP Interface: vlan_1651:lan0
        • RTP Port min: 20000
        • RTP Port max: 40000
      • SIP transport server parameters:
        • Name: ts_lan0
        • Port: 5060
        • IP Interface: vlan_1651:lan0
      • SIP NAP parameters:
        • Name: nap_sip_lan0
        • Proxy Address: 192.168.151.10
        • Port Range: vlan_1651:lan0:pr_lan0:20000-40000
        • SIP Transport Servers: ts_lan0
Retrieved from "https://docs.telcobridges.com/mediawiki/index.php?title=Use_Cases:HW_Transcoding_Configuration_UseCase1_A&oldid=25602"
Personal tools