FreeSBC:Asterisk

From TBwiki
(Difference between revisions)
Jump to: navigation, search
(Prerequisites)
Line 9: Line 9:
 
==Prerequisites==
 
==Prerequisites==
 
*[[FreeSBC|FreeSBC]] devices must be installed as described in their respective with release 3.0.x/3.1.x. Release 3.0.x is not supported for TCP connections [[Product_Installation_SBC|installation guides]].
 
*[[FreeSBC|FreeSBC]] devices must be installed as described in their respective with release 3.0.x/3.1.x. Release 3.0.x is not supported for TCP connections [[Product_Installation_SBC|installation guides]].
*Asterisk.For additional information on Asterisk, visit [http://www.asterisk.org/]
+
*Asterisk.For additional information on Asterisk, visit [http://www.asterisk.org/ Asterisk offical web site].
  
 
==Example Environments for SIPTrunking with Asterisk==
 
==Example Environments for SIPTrunking with Asterisk==

Revision as of 02:39, 9 September 2019


Contents

Introduction

This Configuration Note describes how to set up Telcobridges FreeSBC/ProSBC for interworking between ITSP’s SIP Trunk or remote client access for Asterisk server.

NOTE: SIP Trunk use G.711 in this test. There is no transcoding available.

Prerequisites

Example Environments for SIPTrunking with Asterisk

FreeSBC Sip Trunking.jpg


Example Configuration

Step by step example SIP Trunk configuration.


Example Environments for Remote Workers with Asterisk

FreeSBC Remote Workers.jpg

Example Configuration

Step by step example Remote workers configuration.

Troubleshooting

Call Trace (Paid version only) Test Call (Paid version only) TBReport Advanced Troubleshooting of FreeSBC

Related Content

Please check David Duffett blog post for configuring FreeSBC with Asterisk from the following link [1]

Personal tools