Revision as of 03:54, 10 March 2021

Introduction

This Configuration Note describes how to set up Telcobridges ProSBC for interworking with Sippy Soft Switch.

ProSBC devices must be installed as described in their respective with release 3.0.x/3.1.x. Release 3.0.x is not supported for TCP connections installation guides.
Sippy Soft Switch. For additional information on Sippysoft, visit Sippysoft official web site.

Step by step example SIP Trunk configuration.

Call Trace	Test Call	TBReport	Advanced Troubleshooting of ProSBC
Configure call trace Retrieve call trace	Creating a Test Call	Capture a report of the system	Advanced Troubleshooting of ProSBC

Revision as of 03:46, 10 March 2021 (view source) Serdar Civici (Talk \| contribs) (Created page with "{{DISPLAYTITLE:ProSBC:Sipy Configuration with ProSBC}} =Introduction= This Configuration Note describes how to set up Telcobridges ProSBC for interworking with Sippy Soft Sw...")		Revision as of 03:54, 10 March 2021 (view source) Serdar Civici (Talk \| contribs) Newer edit →
Line 1:		Line 1:
−	{{DISPLAYTITLE:ProSBC:~~Sipy~~ Configuration with ProSBC}}	+	{{DISPLAYTITLE:ProSBC:Sippy Configuration with ProSBC}}

	=Introduction=		=Introduction=