Toolpack system reconfiguration 2-3

Revision as of 08:31, 19 May 2009 (view source) Cbilodeau (Talk | contribs) (add warning picture) ← Older edit		Revision as of 08:35, 19 May 2009 (view source) Cbilodeau (Talk | contribs) (→Toolpack Text-mode Installation) Newer edit →
Line 94:		Line 94:
	== Toolpack Text-mode Installation ==		== Toolpack Text-mode Installation ==
−	Available soon	+	If your host has more than one network interface. It is recommended to set --tbxgwaddr0 and --tbxgwaddr1 parameters.
		+
		+	'''Warning''': For TMG3200 setting --tbxgwaddr0 and --tbxgwaddr1 is mandatory and needs to be set to --tbxgwaddr0 171.32.1.2 --tbxgwaddr1 171.32.1.2.
		+
		+
		+	The next example shows the installation of Toolpack on a Intel Solaris 10
		+
		+	# ./TBToolPack-2.3.1-Solaris-x86-Install --tbxgwaddr0 10.2.0.25 --tbxgwaddr1 10.2.1.25
		+	1.8.7 >= 1.8.5
		+	1.3.2 >= 0.9.0
		+
		+	This will install necessary files to update TBToolPack to version 2.3.1 on your
		+	computer.  Continue? [n/Y] y
		+
		+
		+	===== Basic parameters =====
		+
		+	If you use the same TbxGwPort, the installation will ask if you are sure you want to reconfigure it.
		+
		+	TbxGwPort [12358]
		+
		+	A system with TbxGwPort 12358 already exists.  Reconfigure existing setup ?
		+	[y/N] y
		+
		+	ServiceStartType ("Auto Start" "Demand Start") [Auto Start]
		+
		+	* '''TbxGwPort''': This is the tbx gateway port and will install '''tbtoolpack_${TbxGwPort}''' OS service.
		+	* '''ServiceStartType''': "Auto Start" is use to start the Toolpack service at host boot up, "Demand Start" requires manual start.
		+
		+
		+	===== Multi-Host parameters =====
		+
		+	Multi-Host System [y/N] y
		+
		+
		+	HostRole [Primary,Secondary] [Primary]
		+
		+
		+	Database HA [y/N] y
		+
		+	* '''Multi-Host System''': Tells if the system wil be composed of more than one host.  (Must be true for DBHA)
		+	* '''HostRole''': Set to '''Primary''' on host responsible for '''File replication''' and/or the '''HA database''' configuration.
		+	* '''Database HA''': Yes to use two databases in HA mode.
		+
		+
		+	===== Primary Database Connection =====
		+
		+	OdbcDriver (MySQL) [MySQL]
		+
		+
		+	Primary Database Hostname [tl-sol10i32-00]
		+
		+
		+	Primary Database Username [tbdb]
		+
		+
		+	Primary Database Password [tbdbpw]
		+
		+
		+	Primary Database Port [3306]
		+
		+	* '''HostName''': localhost and 127.0.0.1 are not allowed.
		+	* '''OdbcDriver''': Name of the ODBC driver to use.
		+
		+
		+	===== Secondary Database Connection =====
		+
		+	Secondary Database Hostname [] tl-sol10i32-01
		+
		+
		+	Secondary Database Username [tbdb]
		+
		+
		+	Secondary Database Password [tbdbpw] mysql
		+
		+
		+	Secondary Database Port [3306]
		+
		+	* '''HostName''': localhost and 127.0.0.1 are not allowed.
		+
		+	'''Note''':  Hostname for the Secondary database must differ from the Primary database hostname.
		+
		+
		+	===== ''Optional'' License Installation =====
		+
		+	Note: If you want to add a new license after the installation, simply copy it in the pkg/licenses/ of your toolpack installation.
		+
		+	License Location (*.zip/*.dat)
		+
		+
		+	=====Installation Progress =====
		+
		+	Installing TBToolPack...
		+	Copying
		+	Copying /lib/tb/toolpack/setup/12358/2.3/apps/toolpack_sys_manager/toolpack_sys_manager
		+	Copying /lib/tb/toolpack/tbtoolpack
		+	Could not install TBToolPack as service: install: tbtoolpack_12358 already
		+
		+
		+	===== Installation Complete =====
		+
		+	Installation of TBToolPack complete.
		+
		+	To start tbtoolpack service, type the following command at a shell prompt:
		+	tbtoolpack start
		+
		+	For more options:
		+	tbtoolpack help
		+	#

---

Revision as of 08:35, 19 May 2009

Contents 1 Toolpack Graphical Installation 1.1 Welcome screen Pane 1.2 Installation Type Pane 1.3 Basic parameters Pane 1.4 Basic parameters Pane 1.5 Multi-Host parameters Pane 1.6 Primary Database Connection Pane 1.7 Secondary Database Connection Pane 1.8 Optional License Installation Pane 1.9 Installation Review Pane 1.10 Installation Progress Pane 1.11 Installation Complete Pane 2 Toolpack Text-mode Installation 2.1 Basic parameters 2.2 Multi-Host parameters 2.3 Primary Database Connection 2.4 Secondary Database Connection 2.5 Optional License Installation 2.6 Installation Progress 2.7 Installation Complete

Toolpack Graphical Installation

Welcome screen Pane

Installation Type Pane

Basic parameters Pane

Fields with * are advanced parameters not show in typical setup.

• TbxGwPort: This is the tbx gateway port and will install tbtoolpack_${TbxGwPort} OS service.
• Multi-Host System: Tells if the system wil be composed of more than one host. (Must be true for DBHA)
• ServiceStartType: "Auto Start" is use to start the Toolpack service at host boot up, "Demand Start" requires manual start.
• TbxGwAddr0: For TMG3200, it must always be set to 172.31.1.2. For TMP6400, this value should be set if the host has multiple network interfaces.
• TbxGwAddr1: For TMG3200, it must always be set to 172.31.1.2. For TMP6400, this value should be set if the host has multiple network interfaces.

Basic parameters Pane

If you did not change the TbxGwPort, the installer will show a warning.

Click Yes if you want to reconfigure, if you want to add a new system click No.

Multi-Host parameters Pane

• HostRole: Set to Primary on host responsible for File replication and/or the HA database configuration.
• Database HA: Yes to use two databases in HA mode.

Primary Database Connection Pane

Toolpack requires access to a MySQL database through ODBC. Provide required connection parameters.

Fields with * are advanced parameters not show in typical setup.

• HostName: localhost and 127.0.0.1 are not allowed.
• OdbcDriver: Name of the ODBC driver to use.

Note: MySQL® Connector/ODBC (aka MyODBC) version 3.51 needs to be installed on all platforms prior to toolpack installation. On Unix machines, unixODBC must also be installed and properly configured (ie: must have an entry [MySql] in /etc/odbcinst.ini). See Toolpack prerequisite for details.

Secondary Database Connection Pane

Toolpack requires access to a MySQL database through ODBC. Provide required connection parameters. Fields with * are advanced parameters not show in typical setup.

• HostName: localhost and 127.0.0.1 are not allowed.

Note: Hostname for the Secondary database must differ from the Primary database hostname.

Optional License Installation Pane

Installer can optionally install license(s) for the Tmedia products. License file can be either a single license (*.dat), or a group of licenses (*.zip). To skip license installation , press Next button.

Note: If you want to add a new license after the installation, simply copy it in the pkg/licenses/ of your toolpack installation.

Installation Review Pane

Installation Progress Pane

Installation Complete Pane

After having clicked Finish. Type tbtoolpack start at a shell prompt to start the service, or simply launch ${INSTALLDIR}/toolpack/service/tbtoolpack_service with administrator rights.

Toolpack Text-mode Installation

If your host has more than one network interface. It is recommended to set --tbxgwaddr0 and --tbxgwaddr1 parameters.

Warning: For TMG3200 setting --tbxgwaddr0 and --tbxgwaddr1 is mandatory and needs to be set to --tbxgwaddr0 171.32.1.2 --tbxgwaddr1 171.32.1.2.

The next example shows the installation of Toolpack on a Intel Solaris 10

 # ./TBToolPack-2.3.1-Solaris-x86-Install --tbxgwaddr0 10.2.0.25 --tbxgwaddr1 10.2.1.25
 1.8.7 >= 1.8.5
 1.3.2 >= 0.9.0
 
 This will install necessary files to update TBToolPack to version 2.3.1 on your
 computer.  Continue? [n/Y] y

Basic parameters

If you use the same TbxGwPort, the installation will ask if you are sure you want to reconfigure it.

 TbxGwPort [12358]
 
 A system with TbxGwPort 12358 already exists.  Reconfigure existing setup ?
 [y/N] y
 
 ServiceStartType ("Auto Start" "Demand Start") [Auto Start]

• TbxGwPort: This is the tbx gateway port and will install tbtoolpack_${TbxGwPort} OS service.
• ServiceStartType: "Auto Start" is use to start the Toolpack service at host boot up, "Demand Start" requires manual start.

Multi-Host parameters

 Multi-Host System [y/N] y
 
 
 HostRole [Primary,Secondary] [Primary]
 
 
 Database HA [y/N] y

• Multi-Host System: Tells if the system wil be composed of more than one host. (Must be true for DBHA)
• HostRole: Set to Primary on host responsible for File replication and/or the HA database configuration.
• Database HA: Yes to use two databases in HA mode.

Primary Database Connection

 OdbcDriver (MySQL) [MySQL]
 
 
 Primary Database Hostname [tl-sol10i32-00]
 
 
 Primary Database Username [tbdb]
 
 
 Primary Database Password [tbdbpw]
 
 
 Primary Database Port [3306]

• HostName: localhost and 127.0.0.1 are not allowed.
• OdbcDriver: Name of the ODBC driver to use.

Secondary Database Connection

 Secondary Database Hostname [] tl-sol10i32-01
 
 
 Secondary Database Username [tbdb]
 
 
 Secondary Database Password [tbdbpw] mysql
 
 
 Secondary Database Port [3306]

• HostName: localhost and 127.0.0.1 are not allowed.

Note: Hostname for the Secondary database must differ from the Primary database hostname.

Optional License Installation

Note: If you want to add a new license after the installation, simply copy it in the pkg/licenses/ of your toolpack installation.

 License Location (*.zip/*.dat)

Installation Progress

 Installing TBToolPack...
 Copying
 Copying /lib/tb/toolpack/setup/12358/2.3/apps/toolpack_sys_manager/toolpack_sys_manager
 Copying /lib/tb/toolpack/tbtoolpack
 Could not install TBToolPack as service: install: tbtoolpack_12358 already

Installation Complete

 Installation of TBToolPack complete.
 
 To start tbtoolpack service, type the following command at a shell prompt:
 tbtoolpack start
 
 For more options:
 tbtoolpack help
 #