Control Network

From TBwiki

(Difference between revisions)

Revision as of 15:00, 8 March 2016

The control network is the Ethernet network used by Toolpack to control the Toolpack applications and the Tmedia hardware products.

There are 3 control network:

It is possible to modify the network settings if it overlaps with your private network

Please follow the according to each of your major

There are 2 control network:

@@ Line 1: / Line 1: @@
 __NOTOC__The control network is the Ethernet network used by Toolpack to control the Toolpack applications and the Tmedia hardware products.
-<br>
-== TMG  ==
+== TMG800/TMG3200 ==
-On TMG product, there is 1 control network interface. The Control Network interface is on 172.31.1.2 interface. For TMG800 and TMG3200, it is eth1 interface. For TMG5800, it is the eth2 interface.<br>
+There are 3 control network:
+* 172.31.1.0/30 network
+* 172.16.0.0/15 network vlan 710
+* 172.18.0.0/15 network vlan 711
-<br>
-== TMP  ==
+=== Modifying Control Network ===
+It is possible to modify the network settings if it overlaps with your private network
-=== TMP800  ===
+Please follow the according to each of your major
+* [[Version 2.9|Toolpack:Host_1Plus1_Primary_A]]
+* [[Version 2.8|Toolpack:Host_1Plus1_Primary_A]]
+* [[Version 2.7|Toolpack:Modifying_TMG_Control_Network_A]]
-On TMP800 product, there is 1 control network interface. It is the eth-1 on the back of the device.<br>
+== TMP7800  ==
-<br>
+There are 2 control network:
+* 172.16.0.0/15 network vlan 710
+* 172.18.0.0/15 network vlan 711
-=== TMP6400/TMS1600  ===
-On the TMP6400 and TMS1600, there are 2 control network interfaces available. They are labeled eth1 and eth2 on the back of the devices.<br>
+[[Category:Revise on Major]]