Toolpack v2.5:Creating a New Gateway Configuration
From TBwiki
(Difference between revisions)
| Line 2: | Line 2: | ||
Follow these steps, in order to create a new Gateway configuration: | Follow these steps, in order to create a new Gateway configuration: | ||
| + | |||
1. Select '''Configurations''' , under '''Gateway''' from the navigation panel: | 1. Select '''Configurations''' , under '''Gateway''' from the navigation panel: | ||
Revision as of 14:32, 14 July 2010
The Gateway Application is used to bridge 2 call legs, according to a set of routes. The Gateway Application receives incoming calls from toolpack_engine, tries to find a matching route, remaps call parameters if required, and then tells toolpack_engine to generate an outgoing call.
Follow these steps, in order to create a new Gateway configuration:
1. Select Configurations , under Gateway from the navigation panel:
2. Click Create New Configuration:
3. Enter a name for the new configuration
4. Enter a bin path for the new configuration
5. Enter a working path for the new configuration
6. Click Create:
7. Verify that the "Gateway configuration was successfully created" message appears:
