Toolpack:Creating a SIP Transport Server A
From TBwiki
(Difference between revisions)
| Line 38: | Line 38: | ||
[[Image:Toolpack_v2.5_SIP_Server_Created_2.png|left|frame|Server appears in list.]] | [[Image:Toolpack_v2.5_SIP_Server_Created_2.png|left|frame|Server appears in list.]] | ||
| + | |||
| + | |||
| + | ==List of Parameters== | ||
| + | |||
| + | * [[Parameter: Name|Name]] | ||
| + | * [[Parameter: Port Type|Port Type]] | ||
| + | * [[Parameter: Adapter|Adapter]] | ||
| + | * [[Parameter: IP Interface|IP Interface]] | ||
Revision as of 13:15, 3 August 2010
Now that you have created a SIP stack, you must must create a new SIP transport server for your configuration.
Note: In order to employ SIP transport servers, the protocol that they will use to transport the SIP signaling traffic must be defined.
To do so:
1- Click SIP in the navigation panel
2- Click Edit next to the SIP stack for which you wish to create a transport server
3- Click Create New Transport Server under the Transport Servers list
4- Create the new SIP transport server:
- Enter a name for the server
- Select an appropriate port type
- Select a hardware adapter
- Select an appropriate IP interface
- Click Create
5- Verify that the "SIP transport server was successfully created" message appears, and that the new server is listed in the Transport Servers list
Confirmation message.
Server appears in list.
