SNMP
Cboulanger (Talk | contribs) |
Cboulanger (Talk | contribs) |
||
| Line 1: | Line 1: | ||
| − | Simple Network Management Protocol (SNMP) is, according to Wikipedia, "used in network management systems to monitor network-attached devices for conditions that warrant administrative attention." | + | Simple Network Management Protocol (SNMP) is, according to Wikipedia, "used in network management systems to monitor network-attached devices for conditions that warrant administrative attention." |
| + | <br> | ||
| − | == TelcoBridges and SNMP == | + | == TelcoBridges and SNMP == |
| − | + | ||
| − | + | TelcoBridges offers basic SNMP support (SNMP v1). Specifically, this is the ability to remotely poll or “GET” system variables known as Managed Objects, which are represented in files known as MIBs. TelcoBridges currently offers polling on a limited number of well-known MIBs (RTP, Sonet, Trunk etc.) as well as some proprietary MIBs (SW version, release, temperature sensors), etc.). However, SNMP 'traps' (i.e., alarms) are not supported in the current release, nor is the ability to 'SET' system variables (defined in SNMP v2). | |
| − | The list of MIBs currently exposed by the TMedia gateways are: | + | As of September 2010, TelcoBridges is actively investigating the implementation SNMP v2 support, including GET support as well as alarms/traps at the level of Toolpack. |
| + | |||
| + | The list of MIBs currently exposed by the TMedia gateways are: | ||
*[http://www.ietf.org/rfc/rfc1213.txt|RFC 1213 MIB II] | *[http://www.ietf.org/rfc/rfc1213.txt|RFC 1213 MIB II] | ||
| − | + | ||
| − | *[http://www.rfc-editor.org/rfc/rfc2959.txt|RFC 2959 Real-Time Transport Protocol Management Information Base] | + | Exception of ipRouteTable, EGP group, atTable that are not implemented |
| − | + | ||
| + | *[http://www.rfc-editor.org/rfc/rfc2959.txt|RFC 2959 Real-Time Transport Protocol Management Information Base]<br> | ||
| + | |||
| + | The following tables are supported: rtpSessionTable, rtpSenderTable, rtpRcvrTable.<br> | ||
| + | |||
*[http://www.rfc-editor.org/rfc/rfc2495.txt|RFC 2495 DS1, E1, DS2 and E2 Interfaces] | *[http://www.rfc-editor.org/rfc/rfc2495.txt|RFC 2495 DS1, E1, DS2 and E2 Interfaces] | ||
| − | + | ||
| + | The following tables are supported: Dsx1ConfigTable, Dsx1CurrentTable, Dsx1IntervalTable, Dsx1TotalTable.<br> | ||
| + | |||
*[http://www.rfc-editor.org/rfc/rfc2496.txt|RFC 2496 - Definitions of Managed Object for the DS3/E3 Interface Type] | *[http://www.rfc-editor.org/rfc/rfc2496.txt|RFC 2496 - Definitions of Managed Object for the DS3/E3 Interface Type] | ||
| − | + | ||
| + | The following tables are supported: Dsx3ConfigTable, Dsx3CurrentTable, Dsx3IntervalTable, Dsx3TotalTable<br> | ||
| + | |||
*[http://www.rfc-editor.org/rfc/rfc1595.txt|RFC 1595 - Definitions of Managed Object for the SONET/SDH Interface Type] | *[http://www.rfc-editor.org/rfc/rfc1595.txt|RFC 1595 - Definitions of Managed Object for the SONET/SDH Interface Type] | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| + | The following tables supported: sonetMediumTable, sonetSectionCurrentTable, sonetSectionIntervalTable, sonetLineCurrentTable, sonetLineIntervalTable, sonetFarendLineCurrentTable, sonetFarendLineIntervalTable, sonetPathCurrentTable, sonetPathIntervalTable, sonetFarendPathCurrentTable, sonetFarendPathIntervalTable, sonetVtCurrentTable, sonetVtIntervalTable, sonetFarendVtCurrentTable, sonetFarendVtIntervalTable <br> | ||
| + | |||
| + | *[[Media:TB-MIB.txt|Telcobridges Private MIB]] | ||
| + | |||
| + | == References == | ||
| + | |||
| + | *[http://en.wikipedia.org/wiki/Simple_Network_Management_Protocol Wikipedia article] | ||
| + | *[[TMG SNMP support|How to relay SNMP on TMG products]] | ||
| + | |||
| + | [[Category:Glossary]] [[Category:Needs_revising]] | ||
| − | + | <br> | |
| − | + | ||
Revision as of 15:58, 4 November 2010
Simple Network Management Protocol (SNMP) is, according to Wikipedia, "used in network management systems to monitor network-attached devices for conditions that warrant administrative attention."
TelcoBridges and SNMP
TelcoBridges offers basic SNMP support (SNMP v1). Specifically, this is the ability to remotely poll or “GET” system variables known as Managed Objects, which are represented in files known as MIBs. TelcoBridges currently offers polling on a limited number of well-known MIBs (RTP, Sonet, Trunk etc.) as well as some proprietary MIBs (SW version, release, temperature sensors), etc.). However, SNMP 'traps' (i.e., alarms) are not supported in the current release, nor is the ability to 'SET' system variables (defined in SNMP v2).
As of September 2010, TelcoBridges is actively investigating the implementation SNMP v2 support, including GET support as well as alarms/traps at the level of Toolpack.
The list of MIBs currently exposed by the TMedia gateways are:
Exception of ipRouteTable, EGP group, atTable that are not implemented
The following tables are supported: rtpSessionTable, rtpSenderTable, rtpRcvrTable.
The following tables are supported: Dsx1ConfigTable, Dsx1CurrentTable, Dsx1IntervalTable, Dsx1TotalTable.
The following tables are supported: Dsx3ConfigTable, Dsx3CurrentTable, Dsx3IntervalTable, Dsx3TotalTable
The following tables supported: sonetMediumTable, sonetSectionCurrentTable, sonetSectionIntervalTable, sonetLineCurrentTable, sonetLineIntervalTable, sonetFarendLineCurrentTable, sonetFarendLineIntervalTable, sonetPathCurrentTable, sonetPathIntervalTable, sonetFarendPathCurrentTable, sonetFarendPathIntervalTable, sonetVtCurrentTable, sonetVtIntervalTable, sonetFarendVtCurrentTable, sonetFarendVtIntervalTable
References
