Toolpack:Enabling RADIUS A
From TBwiki
(Difference between revisions)
(Change introduction) |
(Modified link to Configure_Radius_Client) |
||
| Line 30: | Line 30: | ||
5- Additional configuration: | 5- Additional configuration: | ||
| − | *If in any of the choices, Radius CDR is selected, go here to configure Radius: [[ | + | *If in any of the choices, Radius CDR is selected, go here to configure Radius: [[Configure_Radius_Client|Configure Radius Client]] |
*If in any of the choices, Text CDR is selected, go here to configure it: [[Text Call Detail Records (CDR)|Text CDR]] | *If in any of the choices, Text CDR is selected, go here to configure it: [[Text Call Detail Records (CDR)|Text CDR]] | ||
Revision as of 10:17, 9 July 2012
Applies to version(s): v2.6
This page describes how to configure a TMG system to capture CDRs, either with a flat file or with a RADIUS server.
1- Select Gateway -> Configurations from the navigation panel.
2- Verify that the box Use CDR behavior is checked.
3- Configure the CDR behavior in the CDR Options section:
- Enable periodic CDR update will add one entry in the CDR per Periodic CDR update time, in minutes.
- Select the CDR Mode:
- Text CDR only: Will store the CDRs in a flat file. See Text CDR
- Radius CDR only: Will send the CDR to an external Radius Server. See Radius CDR
- Text and Radius CDR: Will store the CDRs in a flat file and send the CDR to an external Radius Server.
- Radius CDR with Text CDR Fallback: Will send the CDR to an external Radius Server and if the Radius server cannot handle the load of CDRs, they will be stored in a flat file.
- Click Save to save your changes.
4- Verify that the Gateway configuration was successfully updated. message appears.
5- Additional configuration:
- If in any of the choices, Radius CDR is selected, go here to configure Radius: Configure Radius Client
- If in any of the choices, Text CDR is selected, go here to configure it: Text CDR
