Toolpack:Creating M2UA Links A

From TBwiki

(Difference between revisions)

Revision as of 13:46, 9 July 2012

Now that you have created an M2UA cluster, you must create M2UA links for your system.

An M2UA link is always bound to an MTP2 link, and can be seen a way of extending MTP2 functionality.

To create an M2UA link:

1- Click Create New M2ua Link in the M2UA cluster configuration window:

2- Configure the new M2UA link:

Enter a name for the link
IMPORTANT!
- For a system on a signaling gateway: Select an MTP2 link
- For a system on a media gateway controller: Select NONE
Select a protocol type (same as MTP2)
Select an interface ID type
Enter an appropriate interface ID (must be unique to each link)
Click Create

3- Verify that the "M2ua Link was successfully created" message appears

@@ Line 1: / Line 1: @@
 === '''''Applies to version(s): v2.5, v2.6.''''' ===
-{{DISPLAYTITLE:Toolpack: Navigating the Web Portal}}
+{{DISPLAYTITLE:Creating M2UA Links}}
 Now that you have created an [[M2UA]] cluster, you must create M2UA links for your system.