Toolpack:Defining a Clocking Source C

From TBwiki
(Difference between revisions)
Jump to: navigation, search
(New Article)
 
m (Applies to version(s): v2.8.)
Line 18: Line 18:
 
3- Create the new clocking source:
 
3- Create the new clocking source:
  
 +
* Enter a name for the clock.
 
* Select the appropriate hardware '''adapter'''
 
* Select the appropriate hardware '''adapter'''
* Select a '''clock reference type''' (in this example, Line Service is selected)
+
* Select a '''clock reference type'''
* Select a '''clock reference source''' (in this example "Line_Service_00")
+
* Select a '''clock reference source'''
  
'''Note:''' In this example, '''Line Service''' is selected chosen as the reference type, and a line service is selected as the clocking source.
+
'''Note:''' In this example, '''Line Service''' is selected as the reference type, and a line service is selected as the clocking source.
To
+
[[Image:CreateSystemClock_2.png]]
+
  
 
4- Verify that the '''System Clock was successfully created''' message appears, and that the new clocking source appears in the '''External System Clock Reference List'''
 
  
 
[[Image:CreateSystemClock_3.png]]
 
[[Image:CreateSystemClock_3.png]]
  
 +
 +
4- Verify that the '''System Clock was successfully created''' message appears, and that the new clocking source appears in the '''External System Clock Reference List'''
 +
 +
[[Image:CreateSystemClock_2.png]]
  
 
==List of Parameters==
 
==List of Parameters==

Revision as of 10:17, 25 August 2014

Applies to version(s): v2.8.

A network clock is a necessary component of a TDM network. Synchronizing your system to a clock will ensure that a good condition of your system is maintained. It is recommended that you configure an external clocking source for your system.

To configure a clock:

1- Click Clocking in the navigation panel

CreateSystemClock 0.png


2- Click Create New External System Clock Reference

CreateSystemClock 1.png


3- Create the new clocking source:

  • Enter a name for the clock.
  • Select the appropriate hardware adapter
  • Select a clock reference type
  • Select a clock reference source

Note: In this example, Line Service is selected as the reference type, and a line service is selected as the clocking source.


CreateSystemClock 3.png


4- Verify that the System Clock was successfully created message appears, and that the new clocking source appears in the External System Clock Reference List

CreateSystemClock 2.png

List of Parameters