Configure Fax VBD A

Allyntree (Talk | contribs)
(Created page with "=== '''''Applies to version(s): v2.8''''' === {{DISPLAYTITLE:Configure Fax VBD}} '''To enable VBD:''' 1. Select '''Profiles''' from the navigation menu. [[Image:ConfigureFa...")
Newer edit →

---

Revision as of 11:22, 9 March 2015

Applies to version(s): v2.8

To enable VBD:

1. Select Profiles from the navigation menu.

2. Click Create New Profile

3. Enter a name for the Fax Profile.

• Click Fax/Modem Relay to expand the view.

4. Configure the settings:

• Set Enable Fax/Modem Relay to enabled.
• Set Detection Mode to Standard.
• Set Relay Mode to Passthrough.
• Set Switch to FAX relay upon CNG tone to checked.
• Select a codec. For example silence suppression

You can set one or both of the following two parameters:

• Set Support V.152 VBD to enabled or disabled.
• Set Force V.152 VBD to enabled or disabled.

5. Verify thet the Profile was successfully created message is displayed.