Toolpack:Defining a Clocking Source D

Allyntree (Talk | contribs)
(Created page with "=== '''''Applies to version(s): v2.9.''''' === {{DISPLAYTITLE:Defining a Clocking Source}} A network clock is a necessary component of a TDM network. Synchronizing your system...")
Newer edit →

---

Revision as of 12:18, 30 October 2015

Applies to version(s): v2.9.

A network clock is a necessary component of a TDM network. Synchronizing your system to a clock will ensure that a good condition of your system is maintained. It is recommended that you configure an external clocking source for your system.

To configure a clock:

1- Click Clocking in the navigation panel

2- Click Create New External System Clock Reference

3- Create the new clocking source:

• Enter a name for the clock.
• Select the appropriate hardware adapter
• Select a clock reference type
• Select a clock reference source

Note: In this example, Line Service is selected as the reference type, and a line service is selected as the clocking source.

4- Verify that the System Clock was successfully created message appears, and that the new clocking source appears in the External System Clock Reference List

Path

Parameters (text)

Parameters (json)

List of Parameters

• Name
• Unit
• Clock Reference Type
• Clock Reference Source