Toolpack:Creating a SIP Transport Server D

Allyntree (Talk | contribs)
(Created page with "=== '''''Applies to version(s): v2.9.''''' === {{DISPLAYTITLE:Creating a SIP Transport Server}} After you create a SIP stack, you must must create a new SIP transport server f...")
Newer edit →

---

Revision as of 17:09, 27 November 2015

Applies to version(s): v2.9.

After you create a SIP stack, you must must create a new SIP transport server for your SIP configuration.

Note: In order to employ SIP transport servers, the protocol that they will use to transport the SIP signaling traffic must be defined.

To do so:

1- Click SIP in the navigation panel

2- Select a SIP stack for which you wish to create a transport server

3- Click Create New Transport Server

4- Create the new SIP transport server:

• Enter a name for the server
• Select an appropriate port type
• Select an appropriate IP interface
• Click Create

5- Verify that the "SIP transport server was successfully created" message appears, and that the new server is listed in the Transport Servers list

Path

Parameters (text)

Parameters (json)

List of Parameters

• Name
• Port Type
• Port
• IP Interface