Toolpack:Configuring DNS Parameters C

Allyntree (Talk | contribs)
(Created page with "{{DISPLAYTITLE:Configuring DNS Parameters}} Applies to version(s): v2.9 == To configure the DNS parameters == 1- Enable Advanced Transport Server Configuration in the SIP co...")
Newer edit →

---

Revision as of 14:39, 30 November 2015

Applies to version(s): v2.9

To configure the DNS parameters

1- Enable Advanced Transport Server Configuration in the SIP configuration window.

• Click SIP in the navigation panel.

2- Select a SIP configuration.

3- Click DNS Parameters in the SIP configuration window.

• Enable the DNS, cache and ENUM support (if required)
• Enter the IP address of the DNS server
• Click Save

4- Verify that the 'SIP transport server was successfully updated' message is displayed.

Path

Parameters (text)

Parameters (json)

List of Parameters

• Enabled
• Use Cache
• Use Enum
• Cache Expire Time
• Query Timer
• Query Retry Count
• Server Address
• Server DNS Port
• Local Port Type
• Local DNS Port
• Local IP Interface