Toolpack:Creating an MTP3 Linkset C

Allyntree (Talk | contribs)
(Created page with "=== '''''Applies to version(s): v2.9''''' === {{DISPLAYTITLE:Creating an MTP3 Linkset}} Once you have created an MTP3 network, you can define linksets to logically combine mul...")
Newer edit →

---

Revision as of 14:47, 30 November 2015

Applies to version(s): v2.9

Once you have created an MTP3 network, you can define linksets to logically combine multiple MTP3 links connecting to the same DPC. For example, one linkset could be the links between a point code identifying a Tmedia/Tdev SS7 node and a point code identifying the adjacent SS7 equipment.

To create an MTP3 linkset:

1- Click MTP3 in the navigation panel.

2- Select an MTP3 network.

3- Click Create New Mtp3 Linkset

4- Configure the new linkset:

• Enter a name for the linkset
• Select an origin point code (OPC)
• Select an adjacent point code
• Make sure the desired state is set to Active
• Click Create

5- Verify that the "Mtp3Linkset was successfully created" message appears

Path

Parameters (text)

Parameters (json)

List of Parameters

• Name
• Origin Point Code
• Adjacent Point Code

Live states

• Desired State