TM3000
(→Monitoring STM1 Patch Panel) |
|||
| Line 27: | Line 27: | ||
*[[Location-based services]] | *[[Location-based services]] | ||
**SMS alerts to roaming subscribers | **SMS alerts to roaming subscribers | ||
| + | |||
== References == | == References == | ||
| + | |||
| + | === Monitoring STM1 Patch Panel === | ||
| + | |||
| + | * Capacity: Dual STM1 full duplex, Four STM1 simplex | ||
| + | * Sensitivity: -31dBm | ||
| + | * Connector type: SFP | ||
| + | * Power: Passive monitoring (no power required) | ||
| + | * Monitoring port: Passive optical splitter 50-50 (1310 to 1510nm) | ||
| + | * Splitter technology: Planar waveguide Optical Signal Splitters | ||
| + | * Tapping device spec: | ||
| + | ** Insertion loss (IL) max: 3.18dB | ||
| + | ** Polarization Dependent Loss (PDL) max: 0.07dB | ||
| + | ** Uniformity loss: (UL) max: 0.24dB | ||
| + | ** Back reflection: min 68.10dB | ||
| + | ** Directivity: Min 61.86dB | ||
| + | * Width: 482m (19inch) | ||
| + | * Height: 1U , 44mm (1.75inch) | ||
| + | * Operating temperature: -40 to 85C | ||
| + | |||
| + | [[File:TM3000 STM1 PP Image.png]] | ||
| + | |||
| + | === Datasheets and installation guides === | ||
*For more information about the TM3000, see [http://www.telcobridges.com/products/network-monitoring-tmonitor/tm3000 TM3000]. | *For more information about the TM3000, see [http://www.telcobridges.com/products/network-monitoring-tmonitor/tm3000 TM3000]. | ||
*[[Media:DATA_SHEET_TM3000.pdf|Data sheet]] | *[[Media:DATA_SHEET_TM3000.pdf|Data sheet]] | ||
Revision as of 10:25, 2 December 2015
The Tmonitor TM3000 provides up to 100% packet capture while it performs non-intrusive, full-duplex monitoring and filtering of two OC3 or STM-1 interfaces per device. Once the data is captured it is then routed by the TM3000 using TCP/IP to an application server from where the data is analyzed and subsequently acted upon. This truely high performance product makes the TM3000 a high-capacity voice and data traffic monitoring solution for OC3/STM-1 connections that service providers can rely upon to record and analyze signaling records and voice traffic. In addition to this, network performance and quality of service (QoS) can be optimzed, while providing service providers with new value-added offerings, such as location-based services (LBS).
Unlike other products in the market today, the TM3000 is not a network-monitoring probe. In fact, the Tmonitor TM3000 does not affect the performance of the network or the status of a call, or introduce any unwanted data artifacts. Furthermore, unlike a software-based solution, the TM3000 does not negatively impact the overall performance of the network. The TM3000 will capture all relevant and required data to provide a truly complete picture of the network’s operations, and the location and status of subscribers, in support of E911 and other real-time LBS efforts. All this is done regardless of the different brands of telecom hardware installed the network.
TelcoBridges also offers the Tmonitor TM1000 for T1/E1/J1 connections.
Contents |
Features & Benefits
Monitoring applications. The Tmonitor TM3000 allows system integrators to build systems to record and analyze voice messages, generate and verify call detail records (CDR) and many others. It also allows services providers to perform fraud detection, lawful interception, and location-based billing.
Carrier-grade performance. The Tmonitor TM3000 is a high volume monitoring solution, with voice recording capacity, while meeting the capacity challenges of OC3/STM-1 connectivity. Multiple TM3000 devices and application servers can be clustered together in one or more facilities to provide essentially unlimited scalability. Application servers can also be deployed remotely for fully distributed monitoring.
Network monitoring flexibility. The Tmonitor TM3000 allows service providers to process and analyze all data captured in SS7, ISDN and HDLC packets and raw OC3/STM-1 traffic, as well as record up to 1024 simultaneous channels of voice traffic. It features highly configurable on-board packet filters so that only relevant information is captured from traffic streams and stored by the system application.
Non-intrusive. In order to maintain overall system performance and QoS, the TM3000 does not introduce latency or otherwise modify or alter the stream of communications. The TM3000 fully supports multi-vendor network architectures and requires no modification to existing communications equipment. The TM3000 also features ZeroLinkDown functionality, enabling full system maintenance, including device replacement, without interrupting the communications network.
Use Cases
The TM3000 device can be applied to the following markets:
- Network monitoring
- Lawful intercept
- Location-based services
- SMS alerts to roaming subscribers
References
Monitoring STM1 Patch Panel
- Capacity: Dual STM1 full duplex, Four STM1 simplex
- Sensitivity: -31dBm
- Connector type: SFP
- Power: Passive monitoring (no power required)
- Monitoring port: Passive optical splitter 50-50 (1310 to 1510nm)
- Splitter technology: Planar waveguide Optical Signal Splitters
- Tapping device spec:
- Insertion loss (IL) max: 3.18dB
- Polarization Dependent Loss (PDL) max: 0.07dB
- Uniformity loss: (UL) max: 0.24dB
- Back reflection: min 68.10dB
- Directivity: Min 61.86dB
- Width: 482m (19inch)
- Height: 1U , 44mm (1.75inch)
- Operating temperature: -40 to 85C
Datasheets and installation guides
- For more information about the TM3000, see TM3000.
- Data sheet
- TM3000 Installation Guide
