Toolpack:Selecting Timeslots for TDM Interfaces C

Allyntree (Talk | contribs)
(Created page with "=== '''''Applies to version(s): v2.9''''' === {{DISPLAYTITLE:Selecting Timeslots for TDM Interfaces}} The last step to the H.248 configuration is to assign timeslots to the TD...")
Newer edit →

---

Revision as of 12:44, 3 December 2015

Applies to version(s): v2.9

The last step to the H.248 configuration is to assign timeslots to the TDM interfaces that are associated with the H.248 configuration.

1- Click H.248 in the naviagtion panel.

2- Select the line service you wish to configure, in the H.248 configuration window

(NOTE: A timeslot mask can be applied to all line services at once by selecting Timeslot mask for all line services instead)

3- Select timeslots:

• Add the desired timeslots by checking individual boxes, or simply select all timeslots by clicking Select all
• Click Save

4- Verify that the "h248_fix_term_cfg was successfully updated" message appears

Path

Parameters (text)

Parameters (json)