Toolpack:Configuring lawful interception C
(Created page with "=== '''''Applies to version(s): 2.9''''' === {{DISPLAYTITLE:Configuring Lawful Interception}} '''Note:''' This procedure assumes that a Law Enforcement Agencies NAP has bee...")
Newer edit →
Revision as of 10:38, 8 December 2015
Applies to version(s): 2.9
Note: This procedure assumes that a Law Enforcement Agencies NAP has been created. Each Law Enforcement Agencies requires that a NAP be configured in order that the intercepted call legs are sent. NAPs can be dedicated for lawful interceptions or not.
Multiple Law Enforcement Agencies can be created in Toolpack. They operate independently of each other. They can intercept the same calls, as well as different ones.
To configure a Law Enforcement Agency:
1- Select Lawful Interception from the navigation panel
2- Enter an Indentifier for the Network Operator.
- Click Save
3- Create a Lawful Agency
- Click Create New Lawful Agency
4- Configure the Lawful Agency parameters:
- Click Save.
5- Verify that the Law Enforcement Agent was successfully created message is displayed.
Path
Parameters (text)
Parameters (json)
