Toolpack:Host Standalone A

From TBwiki
(Difference between revisions)
Jump to: navigation, search
(Added version)
m (version add)
Line 1: Line 1:
=== '''''Applies to version(s) v2.8, v2.9''''' ===
+
=== '''''Applies to version(s) v2.8, v2.9, v2.10''''' ===
 
{{DISPLAYTITLE:Setting the Role to Standalone}}
 
{{DISPLAYTITLE:Setting the Role to Standalone}}
  

Revision as of 08:12, 27 September 2016

Applies to version(s) v2.8, v2.9, v2.10

The first time that you connect to a gateway, the web portal setup wizard will be displayed and you will be asked to select how you would like to configure the role of the gateway. Your choices are standalone, primary, or secondary. Once the role configuration settings are applied, the gateway will start up and display the web portal configuration management tool.

To configure the host role of the gateway as a standalone unit, do the following:


1- When the setup wizard is displayed, click Continue

HostRoleStandalone 0 A.png


2- Select As a stand-alone unit and click Continue.

HostRoleStandalone 1 A.png


3- If you need to change the default subnet address or subnet mask, click change internal subnets and proceed to step 3a, otherwise click Continue and go to step 4.

HostRolePrimary 4 A.png


3a- Enter the subnet address and subnet mask for each VLAN ID and click Continue.

HostRolePrimary 5 A.png

Allow for the change to take effect.

HostRoleStandalone 2 A.png


4- The Web Portal Log On page is displayed.

  • Enter the user name and password.

HostRoleStandalone 3 A.png

Personal tools