Toolpack:Creating a SIP Transport Server D
From TBwiki
(Difference between revisions)
(Northbound Interface content) |
m (rev change) |
||
| Line 1: | Line 1: | ||
| − | === '''''Applies to version(s): v2.9.''''' === | + | === '''''Applies to version(s): v2.9, 2.10''''' === |
{{DISPLAYTITLE:Creating a SIP Transport Server}} | {{DISPLAYTITLE:Creating a SIP Transport Server}} | ||
After you create a SIP stack, you must must create a new SIP transport server for your SIP configuration. | After you create a SIP stack, you must must create a new SIP transport server for your SIP configuration. | ||
Revision as of 14:12, 21 October 2016
Applies to version(s): v2.9, 2.10
After you create a SIP stack, you must must create a new SIP transport server for your SIP configuration.
Note: In order to employ SIP transport servers, the protocol that they will use to transport the SIP signaling traffic must be defined.
To do so:
1- Click SIP in the navigation panel
2- Select a SIP stack for which you wish to create a transport server
3- Click Create New Transport Server
4- Create the new SIP transport server:
- Enter a name for the server
- Select an appropriate port type
- Select an appropriate IP interface
- Click Create
5- Verify that the "SIP transport server was successfully created" message appears, and that the new server is listed in the Transport Servers list
Path
Parameters (text)
/configurations/@[configuration_name]/sip_stacks/@[sipStack_Name]/transport_servers/@[sipTransportServer_name] ip_header_tos = 0 ip_interface = "@[hardware_name].@[voip_Name]" name = "@[sipStack_Name]" port = 5060 port_type = "UDP"
Parameters (json)
{
"ip_header_tos" : 0,
"ip_interface" : "@[hardware_name].@[voip_Name]",
"name" : "@[sipStack_Name]",
"port" : 5060,
"port_type" : "UDP"
}
