Toolpack:Selecting Timeslots for TDM Interfaces C
From TBwiki
(Difference between revisions)
(Created page with "=== '''''Applies to version(s): v2.9''''' === {{DISPLAYTITLE:Selecting Timeslots for TDM Interfaces}} The last step to the H.248 configuration is to assign timeslots to the TD...") |
m |
||
| Line 1: | Line 1: | ||
| − | === '''''Applies to version(s): v2.9''''' === | + | === '''''Applies to version(s): v2.9, v2.10''''' === |
{{DISPLAYTITLE:Selecting Timeslots for TDM Interfaces}} | {{DISPLAYTITLE:Selecting Timeslots for TDM Interfaces}} | ||
The last step to the H.248 configuration is to assign timeslots to the TDM interfaces that are associated with the H.248 configuration. | The last step to the H.248 configuration is to assign timeslots to the TDM interfaces that are associated with the H.248 configuration. | ||
Revision as of 10:40, 7 November 2016
Applies to version(s): v2.9, v2.10
The last step to the H.248 configuration is to assign timeslots to the TDM interfaces that are associated with the H.248 configuration.
1- Click H.248 in the naviagtion panel.
2- Select the line service you wish to configure, in the H.248 configuration window
(NOTE: A timeslot mask can be applied to all line services at once by selecting Timeslot mask for all line services instead)
3- Select timeslots:
- Add the desired timeslots by checking individual boxes, or simply select all timeslots by clicking Select all
- Click Save
4- Verify that the "h248_fix_term_cfg was successfully updated" message appears
Path
Parameters (text)
Parameters (json)
