High Availability:Hardware:Hard Disks
m (→RAID level) |
m (→Recommended Setup: Needs revising edit) |
||
| Line 23: | Line 23: | ||
TelcoBridges highly recommend either storage area network (SAN) and/or RAID 1 and up. | TelcoBridges highly recommend either storage area network (SAN) and/or RAID 1 and up. | ||
| − | The | + | The TSBC-HW-SRV and TMP7900-CTRL include RAID 1 hard disk redundancy. |
[[category:Needs revising]] | [[category:Needs revising]] | ||
Revision as of 12:06, 15 March 2018
The hard disks are one of the hardware components most likely to fail in a system. Therefore, it is important for a high availability system to implement a hard drive redundancy feature.
Contents |
RAID
Although many solutions are available to achieve this goal, the page will talk more specifically of RAID which is included in some of TelcoBridges' products.
RAID level
TelcoBridges has RAID level 1 included in the following products:
It is recommended to use at least RAID level 1 to have a fault tolerant system.
RAID implementation
There are mainly 3 types of implementation of RAID:
- Hardware RAID
- BIOS RAID (not recommended)
- Software RAID
TelcoBridges products containing RAID uses the software implementation. As the name state, the hard disk redundancy is handled by the OS. Of course, it requires an OS that is supported like CentOS.
Recommended Setup
TelcoBridges highly recommend either storage area network (SAN) and/or RAID 1 and up. The TSBC-HW-SRV and TMP7900-CTRL include RAID 1 hard disk redundancy.
