Toolpack:Configuring DNS Parameters C
From TBwiki
(Difference between revisions)
m |
m (revised text portion of the northbound interface) |
||
| Line 39: | Line 39: | ||
<pre> | <pre> | ||
/configurations/@[configuration_name]/sip_stacks/@[sipStack_Name]/dns_parameters | /configurations/@[configuration_name]/sip_stacks/@[sipStack_Name]/dns_parameters | ||
| + | "local_dns_transport_server" : { | ||
| + | "ip_interface" : "@[hardware_name].@[voip_Name]", | ||
| + | "port" : 1024, | ||
| + | "port_type" : "UDP" | ||
| + | }, | ||
cache_expire_time = "12 hours" | cache_expire_time = "12 hours" | ||
enabled = false | enabled = false | ||
Revision as of 13:10, 5 October 2018
Applies to version: v2.9, v2.10, v3.0
To configure the DNS parameters
1- Enable Advanced Transport Server Configuration in the SIP configuration window.
- Click SIP in the navigation panel.
2- Select a SIP configuration.
3- Click DNS Parameters in the SIP configuration window.
- Enable the DNS, cache and ENUM support (if required)
- Enter the IP address of the DNS server
- Click Save
4- Verify that the 'SIP transport server was successfully updated' message is displayed.
Path
/configurations/@[configuration_name]/sip_stacks/@[sipStack_Name]/dns_parameters]
Parameters (text)
/configurations/@[configuration_name]/sip_stacks/@[sipStack_Name]/dns_parameters
"local_dns_transport_server" : {
"ip_interface" : "@[hardware_name].@[voip_Name]",
"port" : 1024,
"port_type" : "UDP"
},
cache_expire_time = "12 hours"
enabled = false
query_retry_count = 3
query_timer = "20 seconds"
server_address = ""
server_dns_port = 53
use_cache = true
use_enum = false
Parameters (json)
{
"dns_parameters" : {
"cache_expire_time" : "12 hours",
"enabled" : false,
"local_dns_transport_server" : {
"ip_interface" : "@[hardware_name].@[voip_Name]",
"port" : 1024,
"port_type" : "UDP"
},
"query_retry_count" : 3,
"query_timer" : "20 seconds",
"server_address" : "",
"server_dns_port" : 53,
"use_cache" : true,
"use_enum" : false
}
}
