Toolpack:Adding an Adapter F
From TBwiki
(Difference between revisions)
m (→Applies to version v2.10, v3.0) |
m |
||
| Line 1: | Line 1: | ||
| − | === '''''Applies to version(s) v2.10, v3.0''''' === | + | === '''''Applies to version(s) v2.10, v3.0, v3.2''''' === |
{{DISPLAYTITLE:Adding Telecom Hardware}} | {{DISPLAYTITLE:Adding Telecom Hardware}} | ||
| Line 5: | Line 5: | ||
| − | + | To add one or more additional hardware devices to the Toolpack system configuration, their serial numbers must be registered with the Toolpack application server. | |
Revision as of 12:27, 27 July 2020
Applies to version(s) v2.10, v3.0, v3.2
When you receive a new system, at least one hardware configuration is available (by default) in the Toolpack application server. To add other hardware devices, use the Tmedia Web Portal.
To add one or more additional hardware devices to the Toolpack system configuration, their serial numbers must be registered with the Toolpack application server.
To add a hardware device:
1- Click Hardware Units in the navigation panel
2- Click Create New Unit, to add a new hardware device
3- Enter information for the following parameters:
- Enter a name for the hardware device
- Enter the serial number of the new hardware device (filling in the Serial Number field will cause auto-completion of the field to occur).
- Select the appropriate hardware device from the Type field.
- Enter the location in which the hardware device is installed.
- Enter a meaningful description about the use or purpose of the hardware device.
- Select Enabled from the Target State field.
- Select the type of TDM lines that the hardware device will support.
- Indicate if the device will operate as a backup in an 1+1 or N+1 configuration. If this is the first device being added, leave this field empty.
- Provide the amount of time in seconds, that the system will wait for calls to complete before shutting down for an upgrade.
- Click Create
NOTE The following image shows the 1+1 Backup field set. This is done for the addition of a secondary device that will operate as the designated 1+1 backup in a 1+1 or N+1 group.
4- Verify that the Unit was successfully created message appears, and that the newly added hardware device appears in the Hardware List.
Path
/configurations/@[configuration_name]/hardware_units/@[hardware_name]
Parameters (text)
/configurations/@[configuration_name]/hardware_units/@[hardware_name] description = "" graceful_upgrade_timeout = 0 is_np1_backup = false location = "" name = "@[hardware_name]" serial_number = "@[serial_number]" target_state = "Enabled" tdm_line_type = "E1_T1_J1" type = "TDM/IP Gateway" /configurations/@[configuration_name]/hardware_units/@[hardware_name]/advanced_parameters casr2_cpu0_load = 50 dsp_reserved_for_play_record = 1 enable_http = true enable_mgmt_port_redundancy = true enable_telnet = true enable_v34 = false enable_vbd_autoswitch = false isdn_primary_cpu_load_percent = 50 load_cas_on_secondary_cpu = false load_isdn_on_secondary_cpu = false load_iua_on_secondary_cpu = true load_lapd_on_secondary_cpu = true load_m2pa_on_secondary_cpu = true load_m2ua_on_secondary_cpu = true load_m3ua_on_secondary_cpu = true load_sip_on_secondary_cpu = true sip_cong_start_thresh = 2 sip_cong_stop_thresh = 4 sip_critical_cong_start_thresh = 1 sip_critical_cong_stop_thresh = 3 sip_dynamic_mem_size = "0 KB" sip_event_mem_size = "0 KB" sip_extra_mem = true sip_reduced_timer_start_thresh = 4 sip_reduced_timer_stop_thresh = 5 sip_signal_mem_size = "0 KB" sip_signal_sizes = "" tdm_companding = "aLaw" voip_codec_AMR = 0 voip_codec_ECHO_H = 0 voip_codec_ECHO_L = 0 voip_codec_ECHO_M = 0 voip_codec_EFR = 0 voip_codec_EVRC = 0 voip_codec_FR = 0 voip_codec_G711_5 = 0 voip_codec_G711_10 = 0 voip_codec_G711_20 = 0 voip_codec_G722_2 = 0 voip_codec_G723 = 0 voip_codec_G726_10 = 0 voip_codec_G726_20 = 0 voip_codec_G728 = 0 voip_codec_G729A = 0 voip_codec_G729EG_8 = 0 voip_codec_G729EG_11_8 = 0 voip_codec_ILBC13 = 0 voip_codec_ILBC15 = 0 voip_codec_mode = "Mixed Mode" voip_codec_QCELP8 = 0 voip_codec_QCELP13 = 0 voip_codec_SMV = 0 voip_codec_T38 = 0 /configurations/@[configuration_name]/hardware_units/@[hardware_name]/call_rate_limiting maximum_cas_call_burst = 0 maximum_cas_calls_per_second = 0 maximum_isdn_call_burst = 0 maximum_isdn_calls_per_second = 0 maximum_sip_call_burst = 0 maximum_sip_calls_per_second = 0 /configurations/@[configuration_name]/hardware_units/@[hardware_name]/congestion_threshold nb_calls_per_period = 10 period_duration = "1 minute"
Parameters (json)
{
"advanced_parameters" : {
"casr2_cpu0_load" : 50,
"dsp_reserved_for_play_record" : 1,
"enable_http" : true,
"enable_mgmt_port_redundancy" : true,
"enable_telnet" : true,
"enable_v34" : false,
"enable_vbd_autoswitch" : false,
"isdn_primary_cpu_load_percent" : 50,
"load_cas_on_secondary_cpu" : false,
"load_isdn_on_secondary_cpu" : false,
"load_iua_on_secondary_cpu" : true,
"load_lapd_on_secondary_cpu" : true,
"load_m2pa_on_secondary_cpu" : true,
"load_m2ua_on_secondary_cpu" : true,
"load_m3ua_on_secondary_cpu" : true,
"load_sip_on_secondary_cpu" : true,
"sip_cong_start_thresh" : 2,
"sip_cong_stop_thresh" : 4,
"sip_critical_cong_start_thresh" : 1,
"sip_critical_cong_stop_thresh" : 3,
"sip_dynamic_mem_size" : "0 KB",
"sip_event_mem_size" : "0 KB",
"sip_extra_mem" : true,
"sip_reduced_timer_start_thresh" : 4,
"sip_reduced_timer_stop_thresh" : 5,
"sip_signal_mem_size" : "0 KB",
"sip_signal_sizes" : "",
"tdm_companding" : "aLaw",
"voip_codec_AMR" : 0,
"voip_codec_ECHO_H" : 0,
"voip_codec_ECHO_L" : 0,
"voip_codec_ECHO_M" : 0,
"voip_codec_EFR" : 0,
"voip_codec_EVRC" : 0,
"voip_codec_FR" : 0,
"voip_codec_G711_5" : 0,
"voip_codec_G711_10" : 0,
"voip_codec_G711_20" : 0,
"voip_codec_G722_2" : 0,
"voip_codec_G723" : 0,
"voip_codec_G726_10" : 0,
"voip_codec_G726_20" : 0,
"voip_codec_G728" : 0,
"voip_codec_G729A" : 0,
"voip_codec_G729EG_8" : 0,
"voip_codec_G729EG_11_8" : 0,
"voip_codec_ILBC13" : 0,
"voip_codec_ILBC15" : 0,
"voip_codec_mode" : "Mixed Mode",
"voip_codec_QCELP8" : 0,
"voip_codec_QCELP13" : 0,
"voip_codec_SMV" : 0,
"voip_codec_T38" : 0
},
"call_rate_limiting" : {
"maximum_cas_call_burst" : 0,
"maximum_cas_calls_per_second" : 0,
"maximum_isdn_call_burst" : 0,
"maximum_isdn_calls_per_second" : 0,
"maximum_sip_call_burst" : 0,
"maximum_sip_calls_per_second" : 0,
"maximum_ss7_call_burst" : 0,
"maximum_ss7_calls_per_second" : 0,
"maximum_total_call_burst" : 0,
"maximum_total_calls_per_second" : 0
},
"congestion_threshold" : {
"nb_calls_per_period" : 10,
"period_duration" : "1 minute"
},
"description" : "",
"graceful_upgrade_timeout" : 0,
"is_np1_backup" : false,
"location" : "",
"name" : "@[hardware_name]",
"serial_number" : "@[serial_number]",
"target_state" : "Enabled",
"tdm_line_type" : "E1_T1_J1",
"type" : "TDM/IP Gateway",
"bondings" : {
},
"cas_stacks" : {
},
"ethernet_ports" : {
},
"ip_interfaces" : {
},
"isdn_stacks" : {
},
"iua_stacks" : {
},
"m2pa_stacks" : {
},
"m2ua_stacks" : {
},
"mtp2_stacks" : {
},
"rtp_port_ranges" : {
},
"sctp_stacks" : {
},
"tdm_line_interfaces" : {
},
"tunnels" : {
},
"virtual_ports" : {
}
}
List of Parameters
- Name
- Serial
- Type
- Location
- Description
- Target State
- TDM Lines Type
- Is N+1 Backup
- Graceful Upgrade Timeout
