Toolpack:Configuring DNS Parameters C
From TBwiki
(Difference between revisions)
m |
|||
Line 1: | Line 1: | ||
{{DISPLAYTITLE:Configuring DNS Parameters}} | {{DISPLAYTITLE:Configuring DNS Parameters}} | ||
− | === '''''Applies to version: | + | === '''''Applies to version: 2.9, 2.10, 3.0, 3.1, 3.2''''' === |
== To configure the DNS parameters == | == To configure the DNS parameters == |
Revision as of 12:29, 18 August 2020
Applies to version: 2.9, 2.10, 3.0, 3.1, 3.2
To configure the DNS parameters
1- Enable Advanced Transport Server Configuration in the SIP configuration window.
- Click SIP in the navigation panel.
2- Select a SIP configuration.
3- Click DNS Parameters in the SIP configuration window.
- Enable the DNS, cache and ENUM support (if required)
- Enter the IP address of the DNS server
- Click Save
4- Verify that the 'SIP transport server was successfully updated' message is displayed.
Path
/configurations/@[configuration_name]/naps/@[nap_name]
Parameters (text)
/configurations/@[configuration_name]/sip_stacks/@[sipStack_Name]/dns_parameters "local_dns_transport_server" : { "ip_interface" : "@[hardware_name].@[voip_Name]", "port" : 1024, "port_type" : "UDP" }, cache_expire_time = "12 hours" enabled = false query_retry_count = 3 query_timer = "20 seconds" server_address = "" server_dns_port = 53 use_cache = true use_enum = false
Parameters (json)
{ "dns_parameters" : { "cache_expire_time" : "12 hours", "enabled" : false, "local_dns_transport_server" : { "ip_interface" : "@[hardware_name].@[voip_Name]", "port" : 1024, "port_type" : "UDP" }, "query_retry_count" : 3, "query_timer" : "20 seconds", "server_address" : "", "server_dns_port" : 53, "use_cache" : true, "use_enum" : false } }